AB 1606-XLB240E 24 - 28 Volt DC Output 90 - 264 Volt Input 1-Phase 10 Amp Output DIN Rail Mount
About 1606-XLB240E :
The 1606-XLB240E power supply offers these features:
• Wide input range, AC 100…240V
• Active PFC
• Cost optimized without compromising quality or reliability.
• Small width of only 49 mm (1.93 in.)
• Efficiency up to 95.2%
• Full power between -25…+55 °C (-13…+131 °F)
• DC-OK relay contact
• 1-year warranty
Please note:
A power supply has to comply with EN 61000-3-2 (Standard for harmonic input current) when:
1) the end-device is used within the European Union and
2) the end-device is connected to a public mains supply with a nominal voltage ≥ 220Vac and
3) the power supply is: - fitted in an end-device with an average input power in excess of 75W or - fitted in an end-device with a continuous input power in excess of 75W or - part of a lighting system.
Instructions:
• Use appropriate copper cables that are designed for minimum operating temperatures of: – 75 °C (167 °F) for ambient up to 55 °C (131 °F) minimum. – 90 °C (194 °F) for ambient up to 70 °C (158 °F) minimum.
• Follow national installation codes and installation regulations.
• Verify that all strands of a stranded wire enter the terminal connection.
• Do not use the power supply without a PE connection.
• Securely tighten unused terminal compartments.
• Ferrules are allowed.
1606-XLE120E & 1606-XLE120EC 24V, 5A; Single Phase Input
Above an average output current of 2.7A, the harmonic current standard EN61000-3-2 is not fulfilled.
Please note:
A power supply has to comply with EN 61000-3-2 (Standard for harmonic input current) when:
1) the end-device is used within the European Union and
2) the end-device is connected to a public mains supply with a nominal voltage ≥ 220Vac and
3) the power supply is:
- fitted in an end-device with an average input power in excess of 75W or
- fitted in an end-device with a continuous input power in excess of 75W or
- part of a lighting system.
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.