GE IC693MDL310 12 OUTPUT POINTS IN TWO ISOLATED GROUPS W/SIX POINTS IN EACH GROUP
Product information GE IC693MDL310 :
IC693MDL310 is a 120-volt, 0.5 Amp AC output module that offers 12 output points in two separate classes. The two classes have six points each. Each class has an isolated common which is not knotted together within the module. This is important since it permits each class to be used in different stages of AC supply. A 3 Amps fuse is used to safeguard every class. An RC snubber is offered to every output to safeguard against transient electrical noise coming from the power line.
IC693MDL310 delivers a high degree of inrush current that enhances the outputs ability to control many inductive and incandescent loads. The AC power to run operations linked to output should be supplied from the user.
There are LED indicators located at the top of the module which indicates the on/off condition of every point. The module makes use of the first 6 LEDs listed as B1 through 6 in the bottom row for output status.
The IC693MDL310 is also regarded as a 16-point output for output 1 to 6 and 9 to 14. The module consists of an insert between the inside and outside surface of the hinged door. The module has an output voltage range of 85 to 132 voltages AC. Its output current is 0.5 Amps per point. The inrush least load current is 5 Amps highest for a single cycle. The module also has an output leakage current of 3 mA maximum at 120 volts AC. The power consumed by the module is 210 mA from 5 volts bus on the backplane. Furthermore, it has an isolation of 500 volts between every class.
Rated Voltage | 120/240 volts AC |
Output Voltage Range | 85 to 264 volts AC, 50/60 Hz |
Outputs per Module | 8 (two groups of four outputs each) |
Isolation | 1500 volts between field side and logic side |
500 volts between each group | |
Output Current t | 2 amp maximum per point 4 amps maximum per group at 40 ° C (104°F) |
Output Characteristics | |
Inrush Current | 20 amps maximum for one cycle |
Minimum Load Current | 100 mA |
Output Voltage Drop | 1.5 volts maximum |
Output Leakage Current | 3 mA maximum at 120 volts AC |
6 mA maximum at 240 volts AC | |
On Response Time | 1 ms maximum |
Off Response Time | 1/2 cycle maximum |
Power Consumption | 160 mA (all outputs on) from 5 volt bus on backplane |
IC693MDL310 's details:
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.