GE Drive Control Board DS200SDCCG2A primary controller for the drive with 3 microprocessors and RAM

DS200SDCCG2A Technical Specifications
Manufacturer GE General Electric
Series Mark V
Part Number DS200SDCCG2A
Product Type SDCC Drive Control Card
Instruction Manual GEI-100029

Product Description
The GE Drive Control Board DS200SDCCG2A is the primary controller for the drive. The GE Drive Control Board DS200SDCCG2A is populated with 3 microprocessors and RAM that can be accessed by multiple microprocessors at the same time. The GE Drive Control Board DS200SDCCG2A is populated with 5 connectors for erasable programmable read-only memory (EPROM). The connectors come from the factory without EPROMs installed. Four of the EPROMs are used to store configuration data from the factory and one EPROM is used to contain user configuration data.

During the replacement procedure, you must wear a wrist strap to protect the EPROMs from static electricity. Remove all five of the EPROMs from the defective board and store them in a safe place. Then, install the EPROMs in the same connectors on the replacement board. In this way, the board will have the same configuration values as the original board.

At the same time when you remove the EPROM chips also remove any auxiliary cards installed on the original board. The auxiliary cards are mounted on the board and they also have cables connected from the optional card. Then, install them on the replacement board along with the EPROMs. Be sure to connect any cables that are required for the optional cards.

Sometimes the replacement board is a newer version of the original board and the replacement board might appear to have different looking components. Also the components might be in different locations and in some cases the components might be missing from the replacement board.

OTHER SUPERIOR PRODUCTS

Similar prodcut for GE Fanuc IC693CMM321

Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.

Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.

Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.