Product Description of IC693CHS391

The GE Fanuc IC693CHS391 is an expansion plate with ten slots. This expansion plate is designed with a slot at the left end of the baseplate especially for the power supply. The unique size of this slot ensures it is only compatible with a power supply. The user should ensure that the IC693CHS391 is connected to the CPU in the first slot of its baseplate. The first slot of the baseplate supports the CPU module which is labeled CPU/1. This module is permitted to have only one CPU baseplate per system. If there is more than one baseplate in the system, then another one must be either Remote or Expansion baseplate. The IC693CHS391 consists of many slots of which slot number 2 and the slots above will have a unique size which is used to connect either option modules or I/O modules.

This module is provided with a 25-pin female connector in its right end to connect to the remote or expansion baseplate. Both remote and expansion baseplates should be connected to the system with a CPU. The number of these baseplates supported by a system mainly depends on the type of CPU used. A maximum of four baseplates can be used if the CPUs 341,340 and 331 are used, otherwise a maximum seven baseplates can be used with CPU 350. The system with remote baseplates requires a cable of less than 700 feet whereas the system requires less than 50 feet for expansion and CPU baseplate. Both remote and expansion baseplates are associated with the DIP switch.

The GE Fanuc IC693CHS391 is a ten-slot expansion plate. It features a 420 milliampere current rating and a 5 volts direct current voltage rating. This GE Fanuc extension base plate is compatible with the Series 90-30 programmable logic controllers, as well as a variety of additional modules. When linked to a PLC, this base-plate can aid to accommodate additional input/output modules, allowing for the seamless operation of applications requiring several devices. A dual in-line package switch is also included on this base plate, and a power module is linked to the leftmost slot. Furthermore, a 25-pin female connection is included as well, which may be used to attach additional expansion plates. Central processing units have their own slot on the IC693CHS391 expansion base plate. It's critical that this base plate contains a CPU or is linked to another base-plate in the PLC system that does. This well-designed GE Fanuc base-plate may be used in a variety of ways. This base-plate can connect up to seven (7) CPU's at the same time, depending on the kind of CPU. Depending on the arrangement of the system, both vertical and horizontal mounting are supported. This base-plate must be installed according to all installation instructions in order to produce appropriate results. Temperature, humidity, and ventilation should all be kept under strict control. It is 17.44 x 5.12 x 5.59 inches in size. Moreover, the IC693CHS391 expansion base-plate necessitates a cable with a reach of fewer than 700 feet to attach to a remote base-plate.

Estimated Shipping Size of IC693CHS391
Dimensions: 5.0" x 18.0" x 1.0"
(12.7 cm x 45.7 cm x 2.5 cm)
Weight: 2 lbs 0.9 oz (0.9kg )