LC high viscosity Roots pump

Overview of LC High Viscosity Roots Pump

The LC high-viscosity Roots pumps produced by our factory are divided into two types: belt drive and gear reducer drive. The reducer-driven Roots pumps have the following characteristics: low speed, small size, large flow, low power consumption, self-priming, no need for oil priming, and easy to use. Roots pumps can be widely used to transport petroleum and petroleum products (copper pump blades can be replaced for gasoline) and various oils and liquids in factories. Such as crude oil, paint, lubricating oil, glass glue, grease acid, toothpaste and light alkaline (soap processing) liquids, etc.; food processing can transport various liquids, such as soybean milk, yeast, molasses, etc. Loading and unloading various tank trucks and tankers, etc., easy to use, and can work in forward and reverse directions.

LC high viscosity Roots pump has an insulation layer added to the pump casing or end cover, and uses steam or heat transfer oil circulation to insulate the pump's working room, thus providing convenient and good conditions for the pump's continuous and intermittent operation.

LC Roots pumps are suitable for conveying lubricating oil or other liquids with similar properties to lubricating oil, which do not contain solid particles and fibers, are non-corrosive, have a temperature not higher than 80°C, and have a viscosity of 5×10-6～1.5×10-3m2/s (5-1500cSt). LCB Roots pumps are also used in hydraulic transmission systems.

LC Roots pump is composed of pump body, pump cover, shaft, gear, rotor, packing, gland and other parts. The LC Roots pump (LC Roots pump) has two forms of belt drive and gear reducer drive. It can be reversed. Skeleton oil-resistant seals are installed at both ends of the shaft and an oil return device is installed in the middle to prevent air intake or oil leakage.