HPE JD086A Compatible 2.5Gb/s SFP ER 1550nm 40km SFP Transceiver
2.5G SFP 1550nm 40km Transceiver
This HPE JD086A compatible SFP transceiver provides 2500Base-EX throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector.
• Hot-pluggable SFP footprint
• Support up to 2.488Gb/s data links
• Compliant with SFP MSA standard
• 1550nm DFB laser transmitter and InGaAs PIN receiver
• Up to 40km on 9/125µm SMF
• Single 3.3V power supply
• Support Digital Diagnostic Monitoring interface
• Duplex LC connector
• Low power dissipation
• Metal enclosure provides lower EMI
• ROHS compliant and Lead-Free
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Differential data input swing | VIN,PP | 300 | 1800 | mVpp | 1 | |
Tx Disable Input-High | VIH | 2.0 | Vcc+0.3 | V | ||
Tx Disable Input-Low | VIL | 0 | 0.8 | V | ||
Tx Fault Output-High | VOH | 2.0 | Vcc+0.3 | V | 2 | |
Tx Fault Output-Low | VOL | 0 | 0.8 | V | 2 | |
Input differential impedance | Rin | 100 | Ω | |||
Receiver | ||||||
Differential data output swing | Vout,pp | 400 | 1000 | mVpp | 3 | |
Rx LOS Output-High | VROH | 2.0 | Vcc+0.3 | V | 2 | |
Rx LOS Output-Low | VROL | 0 | 0.8 | V | 2 |
Notes:
1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.
2. Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.
3.RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Operating Wavelength | λ | 1530 | 1550 | 1565 | nm | |
Ave. output power (Enabled) | PAVE | -3 | 2 | dBm | 1 | |
Extinction Ratio | ER | 8.5 | dB | 1 | ||
Side mode Suppression Ratio | SMSR | 30 | dB | |||
RMS spectral width | Δλ | 1 | nm | |||
Rise/Fall time (20%~80%) | Tr/Tf | 0.26 | ns | 2 | ||
Dispersion penalty | TDP | 3.2 | dB | |||
Output Optical Eye | ITU-T G.957 Compliant | |||||
Receiver | ||||||
Operating Wavelength | λ | 1270 | 1610 | nm | ||
Receiver Sensitivity | PSEN1 | -19 | dBm | 3 | ||
Overload | PAVE | 0 | dBm | 3 | ||
LOS Assert | Pa | -35 | dBm | |||
LOS De-assert | Pd | -20 | dBm | |||
LOS Hysteresis | Pd-Pa | 0.5 | dB |
Notes:
1.Measured at 2.5Gb/s with PRBS 2 223 – 1NRZ test pattern.
2.Unfiltered, measured with a PRBS223 – 1 test pattern @2.5Gbps
3.Measured at 2.5Gb/s with PRBS 223 – 1 NRZ test pattern for BER < 1x10-12
Product Descriptions
Olinkcom's OLSP5525L-CD40 is a high performance small form factor pluggable SFP single mode transceiver for 2.488Gbps SONET OC-48 and SDH STM-16 long reach (LR-1) application. It is fully comply with the SFP Multi-Sourcing Agreement (MSA) and can be used on the MSA compliant networking equipment.
The 2.5Gbps SFP transceiver consists of the below sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1550nm DFB laser and the PIN photo-detector. The SFP transceiver module is a Class 1 laser product complies with FDA/CDRH and IEC-60825 standards.
FAQ:
Q1: What's your main products?
Olinkcom is the manufacturer of optical transceivers, offers full range of transceivers from 155M to 100G, including SFP, SFP+, XFP, SFP28, QSFP+, QSFP28, CFP2 etc.
Q2: Do you have Minimum order quantity?
We don't have any MOQ.