Generic SMF 10G SFP+ Fiber Transceiver 1470nm DOM For Data Communication

Generic 10G CWDM SFP+1470~1610nm 10km SMF Transceiver Module DOM LC Connector

Product Features

● Supports 9.95 to 11.3Gb/s bit rates

● Duplex LC connector

● Hot pluggable SFP+ footprint

● Uncooled 1350nm~1610nm DFB transmitter, PIN photo-detector

● Applicable for 40km SMF connection

● Low power consumption, < 1.2W

● Digital Diagnostic Monitor Interface

● Optical interface compliant to IEEE 802.3ae 10GBASE-LR

● Electrical interface compliant to SFF-8431

● Operating case temperature:

Commerical:0 to 70 °C Industrial:-40 to 85 °C

Applications

● 10GBASE-ER/EW at 10.3125Gbps

● 10G Ethernet

● Other optical links

Product Descriptions

Olinkcom’ OLSCxx1XL-C(I)D40 CWDM DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. This transceiver consists of two sections: The transmitter section incorporates a CWDM EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1.The wavelength λ =1350nm~1610nm, Total 18 wavelengths,20nm spacing

2. Measured at 10.3125b/s with PRBS 2^{31 – 1} NRZ test pattern.

3.Under the ER worst case=5, measured at 10.3125 Gb/s with PRBS 2^{31 - 1} NRZ test pattern for BER < 1x10^-12

All our moduls have High-Performance,Cost-Effective and Reliable Transmission Features.