10GBase SR SFP+ Optical Module Multi Mode Fiber 850nm 300m DDM
Intel E10GSFPSR Compatible 10G SFP+ SR Optics Module (MMF, 850nm, 300m, LC, DDM)
The Intel E10GSFPSR compatible optics is high performance and cost effective SFP+ SR transceiver. It supports data-rate of 10.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW) over multi-mode fiber cable. It is programmed to be compatible with a wide range of Intel Switches, Routers, Network Interface Cards (NICs) and Ethernet Media Converters
Product Features
● Compliant to SFP+ Electrical MSA SFF-8431
● Compliant to SFP+ Mechanical MSA SFF-8432
● Multi rate of up to 11.3Gb/s
● 10G Ethernet compliance or SDH/SONET
● Low power consumption
● 0℃ to +70℃ / -40~85℃ case operating temperature range
● Laser Class 1 IEC / CDRH compliant
● RoHS 6/6 compliant
● Compliant with product safety standards
General Operating Characteristics
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Data Rate | DR | 9.953 | 10.3125 | 10.518 | Gb/s |
|
Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V |
|
Supply Current | Icc5 |
|
| 280 | mA |
|
Operating Case Temp. | Tc | 0 |
| 70 | °C |
|
TI | -40 |
| 85 |
|
Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Operating Wavelength | λ | 840 | 850 | 860 | nm |
|
Ave. output power (Enabled) | PAVE | -6 |
| -1 | dBm | 1 |
Extinction Ratio | ER | 4 | 4.5 |
| dB |
|
RMS spectral width | Δλ |
|
| 1 | nm |
|
Rise/Fall time (20%~80%) | Tr/Tf |
|
| 50 | ps | 2 |
Dispersion penalty | TDP |
|
| 3.9 | dB |
|
Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
Receiver | ||||||
Operating Wavelength |
| 840 | 850 | 860 | nm |
|
Receiver Sensitivity(ER=4.5) | PSEN1 |
|
| -11.1 | 3 | |
Overload | PAVE |
|
| 0.5 | dBm |
|
LOS Assert | Pa | -30 |
|
| dBm |
|
LOS De-assert | Pd |
|
| -12 | dBm |
|
LOS Hysteresis | Pd-Pa | 0.5 |
|
| dB |
|
Notes:
1. Measured at 10.3125b/s with PRBS 231 – 1 NRZ test pattern.
2. 20%~80%
3. Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12
The OLSP851XL-C(I)DS3 is a Class 1 laser product. It fully complies with the multi-sourcing agreement (MSA) which enables it to work in all MSA compliant platforms. OLSP851XL-C(I)DS3 must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
Related Products
PART NO. | DATA RATE | WAVELENGTH | DISTANCE |
OLSP311XL-CD02 | 10Gbps | 1310nm | 2km |
OLSP311XL-CD10 | 10Gbps | 1310nm | 10km |
OLSP311XL-CD20 | 10Gbps | 1310nm | 20km |
OLSP311XL-CD10S | 10Gbps | 1310nm | 40km |
OLSP551XL-CD40 | 10Gbps | 1550nm | 40km |
OLSP551XL-CD80 | 10Gbps | 1550nm | 80km |
OLSP551XL-CDH1 | 10Gbps | 1550nm | 100km |