Mikrotik S+85DLC03D Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver
Olinkcom's Mikrotik compatible S+85DLC03D is a high performance and cost effective transceiver module, supporting data-rate of 10.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW) over multi-mode optical fiber. This product is compatible with a wide range of Mikrotik network equipment, such as 10 Gigabit Ethernet (10 GbE) Switches, Routers, Network Interface Cards (NICs) and Media Converters.
Product Features
• Hot-pluggable footprint
• Electrical interface compliant to SFF-8431
• Compliant with SFF-8472
• 850nm VCSEL transmitter, PIN photo-detector
• Up to 300m transmission on MMF
• 2-wire interface with integrated Digital Diagnostic monitoring
Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Operating Wavelength | λ | 840 | 850 | 860 | nm | |
Ave. output power (Enabled) | PAVE | -6 | -1 | dBm | 1 | |
Extinction Ratio | ER | 4 | 4.5 | dB | ||
RMS spectral width | Δλ | 1 | nm | |||
Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | 2 | ||
Dispersion penalty | TDP | 3.9 | dB | |||
Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
Receiver | ||||||
Operating Wavelength | 840 | 850 | 860 | nm | ||
Receiver Sensitivity(ER=4.5) | PSEN1 | -11.1 | dBm | 3 | ||
Overload | PAVE | 0.5 | dBm | |||
LOS Assert | Pa | -30 | dBm | |||
LOS De-assert | Pd | -12 | dBm | |||
LOS Hysteresis | Pd-Pa | 0.5 | dB |
Notes:
1. Measured at 10.3125b/s with PRBS 231 – 1 NRZ test pattern.
2.20%~80%
3.Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12
Digital Diagnostic Specifications
The OLSP851XL-C(I)DS3 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
Parameter | Symbol | Units | Min. | Max. | Accuracy | Note |
Transceiver temperature | DTemp-E | ºC | -45 | +90 | ±5ºC | 1 |
Transceiver supply voltage | DVoltage | V | 2.8 | 4.0 | ±3% | |
Transmitter bias current | DBias | mA | 0 | 80 | ±10% | 2 |
Transmitter output power | DTx-Power | dBm | -8 | +1 | ±2dB | |
Receiver average input power | DRx-Power | dBm | -13 | 0 | ±2dB |
Notes:
1. Internally measured
2. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser
• CCR1036-12G-4S
• CCR1036-8G-2S+
• CCR1009-8G-1S-1S+
• CCR1016-12S-1S+
• CCR1016-12G
• CRS125-24G-1S Gigabit Ethernet layer 3 Smart Switch
• CRS226-24G-2S+ Gigabit Ethernet Smart Switch
• CRS210-8G-2S+ Gigabit Smart Switch
Related Products | |||
PART NO. | DATA RATE | WAVELENGTH | DISTANCE |
OLSP311XL-CD02 | 10Gbps | 1310nm | 2km |
OLSP311XL-CD10 | 10Gbps | 1310nm | 10km |
OLSP311XL-CD20 | 10Gbps | 1310nm | 20km |
OLSP311XL-CD10S | 10Gbps | 1310nm | 40km |
OLSP551XL-CD40 | 10Gbps | 1550nm | 40km |
OLSP551XL-CD80 | 10Gbps | 1550nm | 80km |
OLSP551XL-CDH1 | 10Gbps | 1550nm | 100km |