10GBASE-LR 10G SFP+ Transceiver SMF 1310nm 10km Alcatel Compatible

Alcatel-Lucent SFP-10G-LR Compatible 10GBASE-LR SFP+ Transceiver SMF 1310nm 10km

The Alcatel-Lucent-LR compatible transceiver provides a high performance and cost-effective solution for 10.3125Gbps (10GBASE-LR) fiber connectivity over single-mode optical cable. It is programmed to be suitable for use with Alcatel-Lucent 10-Gigabit Ethernet Switches, Security gateway appliances and Network Adapters.

Product Features

● SFP+ Form factor compliant with SFP+ MSA SFF-8431 and SFF-8461 standard
● Hot-swappable input/output device plugs into 10 Gigabit Ethernet SFP+ port
● Digital optical monitoring (DOM) capability for diagnostics
● Supports up to 11.3Gb/s bit rates

● Alcatel Compatible

● Up to 10km Reach

● 1310nm Wavelength

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 10.3125Gb/s.

Digital Diagnostic Specifications

The OLSP311XL-C(I)D10 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Notes:

1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75

2. Internally measured

3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

Wide Application
● Widely used on 10G switches, routers, servers, NICs and other transmission equipment
● Suitable for data center, enterprise wiring closet, radio & baseband unit and other environments

● 10GBASE-LR/LW at 10.3125Gbps

● 10G Fiber Channel

● CPRI and OBSAI

● Other optical links

The OLSP311XL-CD10 is a Class 1 laser product. It fully complies with the multi-sourcing agreement (MSA) which enables it to work in all MSA compliant platforms. OLSP311XL-CD10 must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.