1.25G 1550nm LC 80km SFP Optical Transceivers IBM Networks Compatible
IBM Networks Compatible 1.25G Optical Fiber Transceiver 1550nm LC 80km
Product Features
● Supports 1.25Gbps/1.0625Gbps bit rates
● Duplex LC connector
● Hot pluggable SFP footprint
● 1550nm DFB laser transmitter and PIN photo-detector
● Applicable for 80Km SMF connection
● Low power consumption, < 1.0W
● Digital Diagnostic Monitor Interface
● Compliant with SFP MSA and SFF-8472
● Very low EMI and excellent ESD protection
● Operating case temperature:
Commerical:0 to 70 °C Industrial:-40 to 85 °C
Applications
● Gigabit Ethernet
● Fiber Channel
● Switch to Switch interface
● Switched backplane applications
● Router/Server interface
● Other optical transmission systems
Product Descriptions
Olinkcom’ OLSP5512L-C(I)D80,SFP transceivers have high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 80km transmission distance with SMF.The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Operating Wavelength | λ | 1530 | 1550 | 1565 | nm | |
Ave. output power (Enabled) | PAVE | 0 | 5 | dBm | 1 | |
Extinction Ratio | ER | 9 | dB | 1 | ||
Side mode Suppression Ratio | SMSR | 30 | dB | |||
RMS spectral width | Δλ | 1 | nm | |||
Rise/Fall time (20%~80%) | Tr/Tf | 0.26 | ns | 2 | ||
Dispersion penalty | TDP | 3.2 | dB | |||
Output Optical Eye | Compliant with IEEE802.3 z (class 1 aser safety) | |||||
Receiver | ||||||
Operating Wavelength | λ | 1260 | 1610 | nm | ||
Receiver Sensitivity | PSEN1 | -26 | dBm | 3 | ||
Overload | PAVE | -3 | dBm | 3 | ||
LOS Assert | Pa | -40 | dBm | |||
LOS De-assert | Pd | -28 | dBm | |||
LOS Hysteresis | Pd-Pa | 0.5 | dB |
Our all transceivers modules are 100% compatible with Cisco,Juniper ,Arista,Brocade,MikroTik etc.Also welcome customization!