DOM LC SMF 10G SFP+ Fiber Transceiver Arista Compatible Hot Pluggable
10G-LR SFP+ 1310nm 10km DOM LC SMF Module Arista Networks SFP-10G-LR Compatible
Descriptions
Arista Networks SFP-10G-LR compatible SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication.
Absolute Maximum Ratings
Parameter | Symbol | Min. | Max. | Unit | Note |
Supply Voltage | Vcc | -0.5 | 4.0 | V | |
Storage Temperature | TS | -40 | 85 | °C | |
Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Data Rate | 9.953 | 10.3125 | 11.3 | Gb/s | ||
Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Supply Current | Icc5 | 300 | mA | |||
Operating Case Temp. | Tc | 0 | 70 | °C | ||
TI | -40 | 85 |
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Differential data input swing | VINPP | 180 | 700 | mVpp | 1 | |
Transmit Disable Voltage | VD | VCC-0.8 | Vcc | V | ||
Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
Input differential impedance | Rin | 100 | Ω | |||
Receiver | ||||||
Differential data output swing | Vout,pp | 300 | 850 | mVpp | 2 | |
Output rise time and fall time | Tr, Tf | 28 | Ps | 3 | ||
LOS asserted | VLOS_F | VCC-0.8 | Vcc | V | 4 | |
LOS de-asserted | VLOS_N | Vee | Vee+0.8 | V | 4 |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.
Features
● Supports 11.3Gb/s bit rates
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Applicable for 10km SMF connection
● Low power consumption, < 1W
● Optical interface compliant to IEEE 802.3ae 10GBASE-LR
● Electrical interface compliant to SFF-8431
● Operating case temperature: Commerical:0 to 70 °C
Applications
● 10GBASE-LR/LW at 10.3125Gbps
● 10G Fiber Channel
● Other optical links