OEM Compatible 10G SFP+ ER 1310nm 40km DOM LC SMF Fiber Optic Transceiver
10G SFP+ 1310nm 40km Descriptions
The OLSP311XL-CD40 Transceiver Module is designed for use in 10GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecommunication and datacom.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Operating Wavelength | λ | 1530 | 1570 | nm | ||
Ave. output power (Enabled) | PAVE | -2 | 4 | dBm | 1 | |
Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
Extinction Ratio | ER | 4 | dB | |||
RMS spectral width | Δλ | 1 | nm | |||
Dispersion penalty | TDP | 4 | dB | |||
Relative Intensity Noise | RIN | -128 | dB/Hz | |||
Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
Receiver | ||||||
Operating Wavelength | 1260 | 1600 | nm | |||
Receiver Sensitivity @10.3G | -16 | dBm | 2 | |||
Path Penalty | PP | 2 | dB | |||
Overload | PAVE | +0.5 | dBm | |||
LOS Assert | Pa | -30 | dBm | |||
LOS De-assert | Pd | -18 | dBm | |||
LOS Hysteresis | Pd-Pa | 0.5 | dB |
Notes:
1. Measured with worst ER=5dB
2. PRBS 231 – 1 and BER<10-12.
Applications
● 10GBASE-ER/EW at 10.3125Gbps
● 4x, 8x and 10x 10G Fiber Channel
● Other optical links
10G SFP+ 1310nm 40km Features
● Supports 9.95 to 11.3Gb/s bit rates
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Uncooled 1310nm DFB transmitter, PIN photo-detector
● Low power consumption, < 1.3W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-ER
● Electrical interface compliant to SFF-8431,SFF-8432
● Operating case temperature: Commerical:0 to 70 °C