SFP28 25GBASE SMF LC Optical Transceiver Module 1270nm-TX 1310nm-RX 10km
Cisco SFP28 25GBASE 1270nm-TX/1310nm-RX 10km LC SMF Optical Transceiver Module
Product Features
● compliant to SFF-8402 for SFP28 solution
● Digital Diagnostic Monitor Interface with SFF-8472
● Hot pluggable SFP+ footprint
● 1270nm/1330nm DFB transmitter
● Up to 25.78Gb/s data links
● Applicable for 10Km SMF connection
● High transmission margin
● Low power consumption<1.5W
● Single 3.3V power supply
● Operating case temperature:
Commerical:0 to 70 °C Industrial:-40 to 85 °C
Applications
● 25.78 Gb/s single lane
● Other optical links
Product Descriptions
Olinkcom’s OLSB23(32)2XL-C(I)D10 1270,1330nm DFB transmitter uses BIDI transceiver is designed for use in 25Gb/s
data rate over single-mode fiber for link length 10Km.
The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for
25Gb/s single lane optical links.
Optical Characteristics
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Operating Wavelength | 1250 | 1270 | 1290 | nm | ||
1310 | 1330 | 1350 | ||||
Ave. output power (Enabled) | Po | -3 | 5 | dBm | ||
Extinction Ratio | ER | 3.5 | dB | |||
spectral width(-20dB) | Δλ | 1 | nm | |||
Relative Intensity Noise | RIN | -130 | dB/Hz | |||
Dispersion penalty | 3 | dB |
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Receiver | ||||||
Operating Wavelength | 1310 | 1330 | 1350 | nm | ||
1250 | 1270 | 1290 | ||||
Stressed Receiver OMA Sensitivity | Psen | -13 | dBm | |||
Average Receiver Power | Pimax | -13.3 | 2 | dBm | ||
LOS Assert | Pa | -30 | dBm | |||
LOS De-assert | Pd | -13 | dBm | |||
LOS Hysteresis | Pd-Pa | 0.5 | 5 | dB |
More details of our products:
High Reliable Optical Components and Excellent Design
1.DLB laser and PIN photodiode
2.Thick Gold Finger
3.Plating Hard Gold Shell
Cost-effective and Reliable Transmission
Fully Tested for compatibility in our matched switches.
Our all modules have 3 years warranty!