HPE H3C Compatible Direct Attach Cables SFP+ To SFP+ Copper Twinax DAC 1M
HPE H3C Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable 1M
The DAC SFP+ cable assemblies are high-performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fibre Channel applications. SFP+ copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fibre Channel industry standard.
Pin Function Definition
Pin | Logic | Symbol | Description |
1 |
| VeeT | Module Transmitter Ground |
2 | LVTTL-O | Tx_Fault | Module Transmitter Fault |
3 | LVTTL-I | Tx_Disable | Transmitter disable; Turns off transmitter laser output |
4 | LVTTL-I/O | SDA | 2-wire Serial Interface Data Line (Same as MOD-DEF2 in INF-8074i) |
5 | LVTTL-I/O | SCL | 2-wire Serial Interface Clock (Same as MOD-DEF1 in INF-8074i) |
6 |
| Mod_ABS | Module Absent, connected to VeeT or VeeR in the module |
7 | LVTTL-I | RS0 | Rate Select 0, optionally controls SFP+ module receiver |
8 | LVTTL-O | Rx_LOS | Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as Signal Detect) |
9 | LVTTL-I | RS1 | Rate Select 1, optionally controls SFP+ module transmitter |
10 |
| VeeR | Module Receiver Ground |
11 |
| VeeR | Module Receiver Ground |
12 | CML-O | RD- | Receiver Inverted Data Output |
13 | CML-O | RD+ | Receiver Non-Inverted Data Output |
14 |
| VeeR | Module Receiver Ground |
15 |
| VccR | Module Receiver 3.3 V Supply |
16 |
| VccT | Module Transmitter 3.3 V Supply |
17 |
| VeeT | Module Transmitter Ground |
18 | CML-I | TD+ | Transmitter Non-Inverted Data Input |
19 | CML-I | TD- | Transmitter Inverted Data Input |
20 |
| VeeT | Module Transmitter Ground |
Mechanical Specifications
The connector is compatible with the SFF-8432 specification.
Ordering Information
Part Number | Description |
OLCS001XC-CNMx | SFP+ Direct Attach Passive Cable (10GSFP+Cu), 1m, 3m,5m, AWG:30, 0ºC ~ +70ºC |
x means | 1=1m,3=3m,5=5m |