MachineU > China Products > Consumer Electronic > Commonly Used Accessories & Parts > Cable > Data Cables
FDA Approved SFP28 25G AOC Breakout Cable with Metal Enclose
FDA Approved SFP28 25G AOC Breakout Cable with Metal Enclose
Specifications
Brand Name :
OLKOPTO
Model Number :
OLSP82XA-CDMXX
Certification :
RoHS FCC CE GS UL FDA etc
Place of Origin :
Shenzhen China
MOQ :
1pc
Payment Terms :
T/T or Net 30 days
Supply Ability :
80-120k per month
Delivery Time :
3-5 working days
Packaging Details :
Individual package Or 10pcs/pallet Or 20pcs/pallet
Connector Type :
SFP28 to SFP28
Juniper Compatible :
JNP-25G-AOC
Data Rate :
25Gbps
Length :
1~30m （Optional）
Low power consumption :
＜1.0W
Temperature :
0 to 70°C
Description

FDA Approved SFP28 Active Fiber Cable 25G AOC Breakout Metal Enclose

25G SFP28 Active Optical Cable Compatible Juniper Networks 25G-JNP-AOC

Description:

25G SFP28 Active Optical Cable Compatible Juniper (25G-JNP-AOC) is a product to serve 25Gb Ethernet applications. It is designed to enable 25G equipment designs with very high port density based on the electrical and mechanical specification.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Operating Wavelength λ 840 850 860 nm
Output Optical Eye Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength 840 860 nm
Active cable input electrical characteristics
Differential Data Input Voltage VIH-VIL 200 1600 mVpp 1
Differential Input Impedance RIN 90 100 110 Ω
TX-Disable Input Voltage-Low VIL 0 0.8 V 2
TX-Disable Input Voltage-High VIH 2.0 VCC V 2
TX-Fault Output Voltage-Low VOL 0 0.8 V 3
TX-Fault Output Voltage-High VOH 2.0 VCC V 3
Active cable output electrical characteristics
Differential Data Output Voltage

VOH-

VOL

 400 800 mV 1

Differential Output

Impedance

 ROUT 90 100 110 Ω

LOS-Asserted Output

Voltage-Low

 VOL 0 0.8 V 3

LOS-Deasserted Output

Voltage-High

 VOH 2.0 VCC V 3

Pin Defintion And Functions

Pin Symbol Name/Description
1 VEET [1] Transmitter Ground
2 Tx_FAULT [2] Transmitter Fault
3 Tx_DIS [3] Transmitter Disable. Laser output disabled on high or open
4 SDA [2] 2-wire Serial Interface Data Line
5 SCL [2] 2-wire Serial Interface Clock Line
6 MOD_ABS [4] Module Absent. Grounded within the module
7 RS0 [5] Rate Select 0
8 RX_LOS [2] Loss of Signal indication. Logic 0 indicates normal operation
9 RS1 [5] Rate Select 1
10 VEER [1] Receiver Ground
11 VEER [1] Receiver Ground
12 RD- Receiver Inverted DATA out. AC Coupled
13 RD+ Receiver DATA out. AC Coupled
14 VEER [1] Receiver Ground
15 VCCR Receiver Power Supply
16 VCCT Transmitter Power Supply
17 VEET [1] Transmitter Ground
18 TD+ Transmitter DATA in. AC Coupled
19 TD- Transmitter Inverted DATA in. AC Coupled
20 VEET [1] Transmitter Ground

Notes:

1. Module circuit ground is isolated from module chassis ground within the module.

2. Should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.

3. Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.

4. Mod_ABS is connected to VeeT or VeeR in the SFP28 module. The host may pull this contact up to Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP28 module is physically absent from a host slot.

5. RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module.

Absolute Maximum Ratings

Parameter Symbol Min. Max. Unit Note
Supply Voltage Vcc -0.5 3.6 V
Storage Temperature TS -40 75 °C
Relative Humidity RH 5 85 %

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Parameter Symbol Min. Typ Max. Unit Note
Data Rate DR 8.5 25.781 Gb/s
Supply Voltage Vcc 3.13 3.3 3.47 V
Supply Current Icc5 300 mA
Operating Case Temp. Tc 0 70 °C

Applications

* 25G AOC SFP28 Applications

* 25G BASE-SR Etherne

Product tags

qsfp to lc breakout cable

,

mpo to lc breakout cable

,

ptc overcurrent protection
Send your message to this supplier
Send Now

FDA Approved SFP28 25G AOC Breakout Cable with Metal Enclose

Ask Latest Price
Product Detail
Brand Name :
OLKOPTO
Model Number :
OLSP82XA-CDMXX
Certification :
RoHS FCC CE GS UL FDA etc
Place of Origin :
Shenzhen China
MOQ :
1pc
Payment Terms :
T/T or Net 30 days
Contact Supplier
FDA Approved SFP28 25G AOC Breakout Cable with Metal Enclose

Shenzhen Olinkcom Technology Co.,Ltd

Verified Supplier
5 Years
shenzhen
Since 2011
Business Type :
Manufacturer
Main Products :
SFP Optical Transceivers, 10G SFP+ Optical Transceiver, 10G SFP+ Fiber Transceiver
Total Annual :
25000000-28000000
Employee Number :
150~300
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Active Optical Cables
MachineU China Products Consumer Electronic Commonly Used Accessories & Parts Cable Data Cables
Contact Supplier
Submit Requirement