EMI Spring Single Port QSFP28 Cage Aluminum Heat Sink For 100G Ethernet

1. QSFP28 Knowledge Extension

QSFP transceivers are available with a variety of transmitter and receiver types, allowing users to select the appropriate transceiver for each link to provide the required optical reach over multi-mode or single-mode fiber. QSFP modules are commonly available in several different categories:

4 x 1 Gbit/s QSFP

The original QSFP document specified four channels carrying Gigabit Ethernet, 4GFC (FiberChannel), or DDR InfiniBand.

4 x 10 Gbit/s QSFP+

QSFP+ is an evolution of QSFP to support four 10 Gbit/sec channels carrying 10 Gigabit Ethernet, 10GFC FiberChannel, or QDR InfiniBand. The 4 channels can also be combined into a single 40 Gigabit Ethernet link. It is usually for the application of Data center, 40G Ethernet, Infiniband, and other communications standards.

4 x 14 Gbit/s QSFP+ (QSFP14)

The QSFP14 standard is designed to carry FDR InfiniBand, SAS-3. or 16G Fibre Channel

4 x 28 Gbit/s QSFP+ (QSFP28)

The QSFP28 standard is designed to carry 100 Gigabit Ethernet, EDR InfiniBand. or 32G Fibre Channel. This transceiver type is also used with direct-attach breakout cables to adapt a single 100GbE port to four independent 25 gigabit ethernet ports (QSFP28-to-4x-SFP28). Sometimes this transceiver type is also referred to as "QSFP100" or "100G QSFP" for sake of simplicity.

A series of QSFP28 Cage assemblies without integrated connectors supplied by GLGNET, Widely used in the networking, telecommunication and data centre industries. The next generation of high-speed I/O devices, supporting 40G to 100G Ethernet Application. The Press Fit copper alloy cages offer EMI spring or EMI gasket variants and are fully backward compatible with existing QSFP optical modules ( Transceiver ) and cable assemblies.

2. GLGNET QSFP28 Cage ( 49001-00N011 ) Structure:

• 1 X 1 Single Port QSFP28 Cage, without Integrated SFP Connector
• QSFP28 Cage Length : 61.16 mm
• QSFP28 Cage Width : 19.46 mm
• QSFP28 Cage Height : 16.0 mm ( with Heat Sink )
• QSFP28 Cage Press Fit PIN Length: 2.05 mm
• Single Port Width : 18.75 mm
• Single Port Height : 8.95 mm
• Stampled and Formed Metal Cage, with heat dissipation hole;
• Without Light Pipes, can be customized as required
• With Heat Sink, heat sink Material is Aluminum, with Black Oxide treatment on Surface
• Press Fit Mount Type, Can be customized as required
• Cage Material : Copper Alloy
• CLIP : Stailness Steel
• With EMI Tab Spring, provide better EMI shielding to the bezel

3. GLGNET QSFP28 Cage ( 49001-00N011 ) Features

• Available with single or multi-port (panel mount) cages

• Convenient kit with QSFP28 connector and cage

• 3D foot design for improved press-fit retention and contact to host board holes

• One-piece, stainless steel construction

• Low emission design via fold-back spring fingers – no openings for radiation to pass through

• Enhanced transceiver kick-out springs

• Simple and fast installation / removal

• Host board holes not damaged when cage is removed

• Mates with QSFP28 transceivers

• Connectors and cage available

• Press-fit or through-hole solder leads on cages

• Available individually or as a kit (SFPK Series)

• Heat transfer windows on all SFP cage surfaces

• Supports MSA compliant host board layouts and transceiver designs

4. GLGNET QSFP28 Cage ( 49001-00N011 ) Materials

5. GLGNET QSFP28 Cage ( 49001-00N011 ) Advantages:

6. GLGNET QSFP28 Cage ( 49001-00N011 ) Applications:

• QSFP28 Connectors
• QSFP28 Transceivers
• Data/Communications
• High-end servers
• Networking
• Fibre Channel and Gigabit Ethernet
• Networking equipment
• Router/Switch
• Servers
• Storage
• Telecommunications
• Switches
• Telecommunications hardware

This is not a definitive list of applications for this product. It represents some of the more common uses.

7. Application Example: QSFP28 Cage + QSFP28 Connector + QSFP28 Transceiver for 40G to 100G Ethernet;

8. GLGNET Advantages:

• 20 years experiences in Variety Connectors
• 1500 Employees
• 58 R&D Engineers.
• 22000 square meters Factory
• 20kk ports / month Capacity
• We support Costom Service;
• Our products are compliant with RoHS, REACH and UL certification
• Long term Corporation with HUAWEI, ZTE, FOXCONN, XIAOMI, TCL and so on
• 20KK Prots / Month Capacity
• ISO9001, ISO14001, QC080000, OHSAS18001, and IECC international management system certification
• We have our Own Hardware Mold and Plastic Mold
• Has 3 LS-WEDM Machines
• Has 12 WEDM Machines and 8 CNC Machines
• Has 20 Grinding Machines and 12 Electrical Discharge Machines
• Has 30 Stamping Machines
• Has 55 Plastic Injection Machines
• Has Automatic Assembly Workshops
• Fast Response, Professional R&D Engineers, Positive Service Team, Ensure all process effective and well-organized;​

9. GLGNET Customization Service

• Support to make Integrated QSFP28 Connector with EMI Cages, isolated QSFP28 Connector, or Isolated QSFP28 Cages
• The QSFP28 Cage can be with 1 x n Ganged Structure, or 2 x n Stacked Structure
• QSFP28 Cage can be with different heat dissipation Hole
• QSFP28 Cage can be with Light pipes or without, Built in or on Cage top or buttom
• QSFP28 Cage can be with Heat Sink or without, and the Heat sink with different Style
• QSFP28 Cage can be with EMI Finger Spring or elastomeric Gasket
• Different Mount Typ, Press Fit or Solder Post and the Pin length can be customized

10. GLGNET QSFP28 Cage ( 49001-00N011 ) Mechnical Drawing

You can know the Demensions Details from Following Drawing