| OEO Optical signal regeneration converterOEO is optical signal regeneration conversion equipment based on the principle of O-E-O. The product is applied to optical signal wavelength conversion, single mode conversion, relay amplification, signal regeneration and other occasions and is widely used in the field of optical communication. |
![]() | Full rate access:155Mbps~11.3Gbps; |
Parameters | Unit | Specifications | |||||
| Workingwavelength | nm | 850 | 1310 | 1550/CWDM/DWDM | | |
Transmission distance | km | 0.3 | 10 | 40 | 80 | | |
Input power range | dBm | -11~-1 | -14~0 | -16~0 | -24~-7 | | |
Output power range | dBm | -6~-1 | -6~0 | -1~+3 | 0~+4 | | |
2.5Gbps | Workingwavelength | nm | 1310 | 1550/CWDM/DWDM | DWDM | | |
Transmission distance | km | 20 | 40 | 80 | 120 | | |
Input power range | dBm | -18~0 | -18~0 | -28~-10 | -30~-10 | | |
Output power range | dBm | -5~0 | -2~+3 | 0~+5 | 0~+5 | | |
1.25Gbps | Workingwavelength | nm | 850 | 1310 | 1550/CWDM/DWDM | ||
Transmission distance | km | 0.55 | 10 | 40 | 80 | 120 | |
Input power range | dBm | -18~-3 | -18~-3 | -24~-1 | -24~-1 | -31~-9 | |
Output power range | dBm | -9~-3 | -9~-3 | -5~0 | 0~+5 | 0~+5 | |
622Mbps | Workingwavelength | nm | 1310 | 1550/CWDM | 1550 | | |
Transmission distance | km | 20 | 40 | 80 | 120 | | |
Input power range | dBm | -28~-8 | 28~-8 | 28~-8 | -31~-9 | | |
Output power range | dBm | -14~-8 | -5~0 | -3~+2 | 0~+5 | | |
155Mbps | Workingwavelength | nm | 1310 | 1550/CWDM | | ||
Transmission distance | km | 20 | 40 | 80 | 120 | | |
Input power range | dBm | -32~-3 | -34~-9 | -34~-9 | -34~-9 | | |
Output power range | dBm | -14~-8 | -7~-2 | -5~0 | 0~+5 | | |
Extinction ratio | dB | ≥10 | |||||
dithering performance | | ConformITU-T G.825(2000) | |||||
SMSR | dB | > 30 | |||||
power dissipation | W | <10 |