PLC Control Gutter Roll Forming Machine For Steel Roof Ridge Tile Cap

Ridge Tile or Cap roll forming machine brief specifications

This ridge cap roll forming machine can rollform metal ridge which is mostly used with colorful roofing tile sheets. The whole roll forming line buildup by de-coiling (mainly consists of un-coiler and its base), gearing rigging, roll stand and main machine, pressuring system, cutting equipment, hydraulic system, control system, and product supporter.

Ridge Tile Cap roll forming machine main parameters

Building Products- Flashings

Flashings for metal roof and wall cladding

The flashing products can be satisfactory for use as roofing panel abutment, flashings on tiled roofs, or slated roofs. So the end-wall flashing, gable trim, ridge cap, roll formed valley gutter, roof battens, drip edge and sidewall flashing have been developed.

Machine specification

1. The system adopts hydraulic drive mode, up and down clamp to achieve the clamping steel plate;
2. unique parallelogram hinge mechanisms to achieve the flap rotation to bending plate, the maximum bending angle of up to 125 ° (work piece minimum angle of 55 °), without using a mold. Back-gauge positioning mechanism is to achieve the precise positioning of plates, it is CNC controlled.
3. The pressure compensated, load sensing hydraulic system.
4. The machine is configured with the longitudinal slitter, slitting strip width can be adjusted.
5. Rain penetration through tile roofs is often caused by the cracking of sand and cement adhesive frequently used for tiles.
6. Sand and cement adhesive has little flexibility and can crack due to natural movements in a house or temperature fluctuations.
7. Metal flashing roll formed products, such as the tile cap has been purposely developed to overcome the disadvantages of the traditional sand and cement adhesive.
8. Tile ridge cap pointing material was tested to cyclic fatigue loading conditions.
9. The sample system adhesive successfully passed the test criteria at the design pressure.
10. The following is the specification for the metal roof ridge tile roll forming machine.
11. We can manufacture as per customer provided drawings or real objects of sectional materials, customization is welcome. PLS contact with us for the further details!

Machinery Shows

Factory Profiles