Gearbox Drive Cast Iron Structure W-Beam And Thrie-Beam Highway Guardrail Roll Forming Machine

Crash barrier forming equipment have been designed for producing w beam guardrails with 2 wave and 3 waves or the beams placed on both sides of highway or expressway.The driving of machine is gear box, that is more stable than chain driving.It is composed of Manual Decoiler,material feeding,raw material leveling,punching device,main forming,automatic cutting.The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length, machine will stop to cut the sheet automatically.Finish this action,the machine will run again continuously, and extra beam is required to fix guardrail.punching holes are required on that.Common thickness 3-4mm.

Main Technical Parameters

Guardrail plate, the use of soil, columns, beams, endurance plate deformation to absorb collision energy, and force the runaway vehicle to change direction, back to the normal direction of travel, to prevent the vehicle from rushing out of the road, to protect the vehicle and passengers, reduce the loss caused by the accident. (highway guardrail roll forming machine/ highway guardrail bending machine)

Colour: galvanized silver white, sprayed green, white, blue, etc. (W-beam guardrail roll forming machine/W-beam guardrail bending machine)

According to the waveform can be divided into double waveform guardrail and three waveform guardrail.

According to the surface treatment is divided into hot-dip galvanized waveform guardrail and galvanized plastic spraying two. (Thrie-beam guardrail roll forming machine/ Thrie-beam guardrail bending machine)

According to the setting location can be divided into road side guardrail and central divider guardrail. (Guardrail post Roll Forming Machine / Guardrail post roll forming Machine)

Pictures of Gearbox Drive Cast Iron Structure W-Beam And Thrie-Beam Highway Guardrail Roll Forming Machine