Shelf System Roll Forming Machine Upright Rack Step Beam Box Beam Cross Bar Shelf Panel

Medium shelves(heavy-duty shelf system roll forming machine) are named according to the layer load of the shelves, the layer load is 300kg-500kg per layer, between light shelves (100kg-300kg per layer) and heavy shelves (500kg or more), belong to the conventional shelves, shelves manufacturers usually have in stock, there are a variety of specifications for customers to choose, suitable for all types of storage industry use, belong to the combination structure, simple and convenient installation and disassembly.

Features of medium-sized shelves　　

1,The shelf column(upright rack forming machine) is made of cold-rolled steel plate rolled by a special cold-forming machine, the front of the column(upright rack forming machine) is punched with double rows of holes, the holes are arranged at a distance of 75mm along a straight line, the column holes are used for hanging the crossbeam; the two columns are opposite to each other, and the two columns are assembled into the column piece of the shelf with diagonal and horizontal braces in the middle.　　

2,The crossbeam of the shelf is made of "P" type pipe, commonly known as "ladder beam"(step beam roll forming machine), and the height of the ladder matches the height of the laminate.　　

3,The steel shelves(shelf panel roll forming machine) are made of cold rolled steel sheets bent on all sides according to the required size.　　

4,The beams(step beam roll forming machine or box beam roll forming machine) are assembled into a frame by hanging with the column pieces, after which the steel laminate is laid, so that a complete set of medium-sized shelves is formed.　　

5,After all the parts of the shelves are processed and shaped, they are assembled into finished products after grinding, pickling, phosphating, automatic powder electrostatic spraying, drying and other processes. The finished shelves are produced with a clean and beautiful surface.　　

6,After the shelves are put into use, if the height of the goods is adjusted and the existing shelf height cannot meet the storage demand, the crossbeam can be pulled out of the column hole and the height of the crossbeam can be adjusted according to the height demand, the upper and lower can be installed with 75mm pitch arbitrary adjustment, and then the crossbeam can be stuck into the column hole.

The roll forming machine can produce columns, beams, diagonal braces and shelf boards in the complete shelving system. Each component requires a separate roll forming machine to produce it as shown in the diagram above. Each machine can produce one or more sizes of profiles. LINBAY offers not only equipment, but also a complete VIP customer service system.

Pictures of components:

Upright rack roll forming machine

Cross bar roll forming machine

Box beam roll forming machine