76.2*76.2 2mm Upright Rack Roll Forming Production Line Medium-Weight Shelving

Medium-weight shelving(upright rack roll forming machine): Medium-weight shelving(warehouse shelf roll forming machine) is strong and sturdy, with a large load-bearing capacity. Medium-weight shelving(galvanized steel upright rack roll forming machine) is widely used in shopping malls, supermarkets, corporate warehouses and institutions. Usually divided into medium weight A shelves, medium weight B shelves and medium weight C shelves. All metal parts of the shelves are rust-proofed and electrostatically sprayed on the outside; the medium-weight shelves are suitable for storing goods in small, medium and large warehouses.

It is suitable for manual access to goods, low cost, safe and reliable, easy to assemble and disassemble, and can be used individually or freely spliced into various arrangements. Second, the column piece is made of two columns connected by cross brace and diagonal brace with nylon self-locking bolts, which can effectively prevent the instability of the shelves caused by the loose bolts; Third, the cross beam is made of special cold-rolled P-type closed beam, which has the characteristics of simple and reliable, light weight, strong bearing capacity and low cost. Specially designed safety pins are provided for the connection between the hanging claws and the column; this ensures that the crossbeam will not fall off after an external impact; the most popular international strip laminate is used, which has the characteristics of strong load-bearing capacity, wear resistance, simple replacement and low maintenance cost. The laminate can be made up of steel laminate, wooden laminate and steel mesh. The laminates are laid on the beams, which have a great load-bearing capacity, and between the beams can be laid partition nets and various partitions.

Flow chart:

Hydraulic decoiler--Leveler--Servo feederwith hydraulic punch--Guiding--Roll forming machine--Hydraulic flying shear--Out table

In countries such as Mexico and Colombia, the more common size of shelf column is 2", i.e. 76.2*76.2mm. the line speed is 0-6m per minute, and with a punch press the line speed can reach 0-10m per minute. The shelf column production line produces one profile on one machine, or one profile on one set of forming rollers, which can be changed by changing rollers or cassette to produce different profiles.

LINBAY forming upright rack roll former is suitable for forming galvanized and CS stainless steel and copper, etc.

Most customers order galvanized and carbon steel for commercial construction is more popular.

Pictures of components:

Hydraulic decoiler

Hydraulic punch

Upright rack roll forming machine

Fotoelectric sensor to cut length