Heavyduty Shelving Upright Rack Roll Forming Machine Automatic Size Change

Some of the features of heavy-duty shelving(produced by warehouse system roll forming machines) are: heavy-duty warehouse shelving is assembled from columns(produced by upright rack roll forming machine), beam(produced by step beam roll forming machine or box beam roll forming machine), cross braces(produced by cross bracing rack roll forming machine), diagonal braces(produced by diagonal bracing rack roll forming machine) and self-locking bolts, which can effectively prevent the shelves from becoming unstable when the bolts are loose; the beams are generally made of special cold-rolled P-type closed-ended beams; special 3-fork pegs are connected to the column cards, while L-type safety pins are equipped to ensure that the beams will not fall off under external impact; the laminates are made of international The laminates are made of internationally made strip laminates, which can also be used at the same time by putting pallets directly(produced by shlef pallet roll forming machine). Due to its material and structural characteristics, the heavy-duty shelving has a high load-bearing capacity, is resistant to wear and tear, is easy to replace and has low maintenance costs.

The characteristics of the shelves determine the range of use. Heavy duty shelving is more suitable for use in manufacturing industries, in warehouses for bulky materials, and for other products that can be packed and concentrated with pallets in advance. In fact, heavy-duty shelving supports the use of almost all products. The amount of storage depends on the set-up of the storage space and other space available.

Flow chart:

Hydraulic decoiler--Leveler--Servo feeder--Punch press--Guiding--Roll forming machine--Hydraulic flying shear--Auto stacker

This upright rack roll forming production line is more expensive and is the type of line preferred by Chinese companies. The whole line is fully automated, giving the manufacturer a reduction in worker costs. Only 1-2 workers are needed to help load the entire line. After a certain number of sections have been wrapped and packed in plastic film, they are simply loaded and unloaded by forklift to the designated stacking position to complete the production process. Therefore, only 2 workers are needed to load the material, 1 worker operates the PLC control cabinet after loading and 1 worker drives the forklift to unload the material.

Thanks to the use of presses, the entire line can reach speeds of up to 10 metres per minute. In the forming part we use a 1.5kw traverse motor to achieve the ability to produce multiple sizes for future planning.

Pictures of components:

Hydraulic decoiler

Leveling machine

Upright rack roll forming machine