Steel Deck 63mm Roll Forming Machine Galvanized Steel 2'' Floor Deck


Flow chart of Steel Deck 75mm Roll Forming Machine Galvanized Steel 3'' Floor Deck:
Hydraulic decoiler--Guiding--Embossing--Roll forming--Hydraulic cut--Out table

LINBAY MACHIENRY exported this METAL DECK machine to Iraq. This machine is producing common floor joist size 75mm high. The floor bearing plate production line is recommended to use hydraulic uncoiler, the general thickness of the floor bearing plate is 0.8mm or 1mm, the width of the steel coil is 1250mm or 1220mm, so the steel coil is big and heavy, so the hydraulic uncoiler is more suitable to speed up the process of replacing the steel coil and improve the efficiency of the whole production process.

Floor forming machine(metal deck roll forming machine/metal deck bending machine), including uncoiler, feeding mechanism, forming machine, shearing mechanism, hydraulic station to drive the movement of the shearing mechanism, PLC control cabinet to control the work of the hydraulic station and the discharge port for the discharge of the floor slab, (floor decking roll forming machine/ floor decking bending machine) the hydraulic station is located above the discharge port, the shearing mechanism is located on the discharge port, the discharge port is provided with a load-bearing table located in front of the shearing mechanism, the load-bearing table is fixed to the side wall of the discharge port, and a baffle plate is provided above the load-bearing table, The baffle plate and the load-bearing table between the formation of the floor plate for moving through the slot. The beneficial effect of the utility model: the front section of the floor slab is located on the load-bearing table, so when the shearing mechanism completes cutting a section of the floor slab, although the front section of the completed shear section due to the connection with the back section of the strength of the decline, but because the centre of gravity of the front section is located on the load-bearing table, maintain the vertical state, until the completion of the floor slab cutting, (roof deck roll forming machine/ roof deck bending machine) so as to maintain the flatness of the front section of the first completed shear section and the second completed shear section This keeps the flatness of the front section first and the part to be cut later consistent and reduces processing errors. (Steel deck roll forming machine/Steel deck bending machine)






Pictures of Steel Deck 75mm Roll Forming Machine Galvanized Steel 3'' Floor Deck: