Customized Sizes Rubber Docking Berthing Yokohama Fenders

Product Introduction

Yokohama fender is also known as pneumatic rubber fender. It was fiest invented by the manufacturer of YOKOHAMA, so it now also called Yokohama fenders. After years of improvement, Shunhang's rubber pneumatic rubber fenders used special technilogy and material, makes it to have better performance .

Boat Rubber Fender Types Are Defined As Follows:
1. Type I — Net-type;
2. Type I Single — Net-type and one end with no flange opening and no metal parts.
3. Type II — Sling-type.

Features of Yokohama Fender

1. Guaranteed energy absorption

2. Chain tyre net and sling type

3. Thick skin construction

4. Good angular performance

5. Less surface pressure onto the side wall of ships. (The capability of accepting surface pressure of the fender is up to 14 ton/m2).

6. No reduction on the performance of compression when inclined.

7. Suitable for areas with large or small tides.

8. Suitable in cold weather because the compressed air as buffering medium.

9. Especially in mooring of large scale ships in sea docks and lightering.

10. Maintains large clearances between hull and structure

Specificaton of Yokohama Fender:

Initial internal pressure : 50kPa or 80kPa.

Notice Of Fender Application And Storage

1. The fender pressure should be kept in the standard pressure ,within the rate of ± 5% range.

2. Often check the pressure , when the pressure drops, Inflate the fender in time, so as not to affect the normal use of the fender.

3. When connecting the fender with a steel wire rope, the wire rope should be fitted with a rubber sleeve to avoid damage to the fender

4. Do not touch the fender surface with the the sharp objects , to prevent piercing the fender. If the fender's surface is damaged, it will affect the lifespan of the fender.

5. When the fender is in normal use, the fixing points should be firm, prevent the detachment and wash away the fender. Suspension of the rope and hook ring should be connected orderly , can’t be in a mess.

6. If the fender won’t be used in a long time , to clean the fender surface with fresh water, and place the fender in a dry, cool, ventilated place, without direct sunshine.

7. When the fender is stored for a long time, the pressure should be reduced and the fender should be placed far away from the heat source.

8. Because the fender is rubber product, should try to avoid the fireworks, not contact with acid, alkali, oil and other organic solution

9. When the fender is stored, it shall not be folded or stacked, and don’t stack other objects on the fender.

Yokohama Fender Inspection Before Delivery

Application of Yokohama Fender

FAQ:

Q1: What's the MOQ of your Yokohama fender ?

Answer: The MOQ is 1pc. Sample order is acceptable.

Q2: What's the lifespan of your Yokohama fenders?

Answer: Designed lifespan of our Yokohama fenders is 6 to 10 years

Q3: How long is your warranty period?

Answer: Our warranty period is 2years.

Q4: Can you help us to recommend suitable Yokohama fenders size and quantity ?

Answer: Pls tell us your ship information, we can suggest suitable size and quantity for you.

Q5: What kind certificate you can provide.

Answer: We can provide CCS, BV, SGS, RS, ABS. etc.