Factory Direct Sale Silicone Plate Rubber Sole Press Tyre Vulcanizer Vulcanizing Machine South Africa
Raw rubber is a clay-like plastic body, which contains a certain proportion of sulfur, and is heated and pressurized at a certain temperature.
Under high temperature and pressure, it becomes elastic rubber through a chemical reaction for a period of time.
The rubber molecules play the role of bridges between the molecules, so the process of turning raw rubber into cooked rubber is called vulcanization.
The vulcanization time refers to a period of time during which the vulcanization temperature is maintained to make the tape fully vulcanized, also known as the holding time.
Introduction to the structure of the vulcanizer:
1. Structural stability: a special four-column structure is adopted, the upper seat is reinforced with medium carbon steel, and the upright column is thickened and hardened to ensure structural stability and accuracy.
2. System: The high plane pressure equalization correction is adopted, and the pressure (18mpa) strengthens the nut leveling device, which can increase the parallelism of the upper and lower heating plates to 0.05mm.
3. Temperature control system: Adjustable from room temperature to 350°C, using intelligent temperature control to control the temperature fluctuation range within ±2°C.
4. Operating system: PLC combined with touch screen, whether debugging or production, can be controlled directly and simply.
5. Operating system: The optimally designed oil circuit and high-quality oil circuit accessories ensure the smooth operation of the entire oil circuit system from the principle and accessories.
6. Energy-saving system: The heating plate adopts the deep hole processing technology, which is closely matched with the heating pipe to reduce the heat loss during the heat transfer process.
7. The intelligent system can automatically push out the mold, thereby reducing the labor time of the staff, increasing efficiency, high output and saving time.
Scope of application:
Children's toys, baby products, kitchen supplies, clothing labels, equipment seals, etc.
Technical parameters:
Model No. | FLD-V70T |
Machine size | 1600*1200*1600mm |
Weight | 1100kg |
Power | 13kw |
Hot plate specifications | 400*400mm |
Temperature range | Normal temperature -350℃ |
Hot plate spacing | 200mm |
Way to heat up | Imported heating tube |
Mold opening method | Automatic mold release |
System pressure | 18MPa |
Main column diameter | 210mm |
Clamping stroke | 220mm |
Work level | Upper and lower layers |
Motor power | 3.75kw |
Greatest pressure | 70 tons |
Machine structure | Four-column/single-head model |
Power specifications | 380V/50HZ |