Dripping machine Shoe Charms Machines Epoxy Resin Dispensing Pvc Zipper Puller Dripping Machine With Factory Direct

Dispenser - cleaning of epoxy resin
The epoxy resin (expoxy) should be automatically cleaned once every shift with the storage pressure cylinder of general toluene solvent, and the more often the cleaning, the better.
shortcoming
(This is a problem caused by lowering the cost of products to attract customers in the market. Therefore, when buying equipment, it is not allowed to only consider the price, but also the quality of the machine itself, so as to ensure the stability and operability of the product as much as possible. , in ensuring the overall quality of the product).
1. The internal cooling system of the machine is not very good, and there are already dispensers with good cooling systems on the market;
2. There will be crashes from time to time;
3. When the LCD is reversed to black, garbled characters will appear;
4. The position deviation of the machine (this situation will occur after running for a period of time) and the actual workpiece;
5. The electrostatic treatment is not ideal (a lot of static electricity is generated);
6. The running speed of the three axes is relatively slow, which is different from the actual speed required by the manufacturer;
7. The machine will run around under normal operation conditions (this is more dangerous to operate);
8. The Relay of the Table will be broken down after a period of time when the Table is used in conjunction with a small glue dispenser, resulting in glue leakage in the signal output all the time;
9. The program of the CF card is not stable enough, and the industrial computer is often burned;
10. The load bearing capacity of the machine is relatively weak;
11. The connection of the connector of the driver board is relatively loose, which can easily lead to poor contact between the motherboard and the driver board (both are plastic connectors).