Keming -30 Concrete Pump Machine S Tube Valve Pump For Construction Wet Concrete Conveying

Introduction:

With Relay-based integrated electronic control system, simple and reliable, more user-friendly design; surfacing Shaped glasses plate, cutting ring is not only high hardness, and repair. use and low cost.Can also choose the high life of carbide cutting ring plate glasses. Well-designed open.Double-circuit hydraulic system, for the small impact: can lift guide rollers.

2. This modern construction equipment is widely applied for concrete pumping or spraying in hydroelectric works, subway, tunnel, culvert, high building, coal mine, port and other engineering construction.

Concrete pouring refers to the process of pouring concrete into the mold until it is plasticized.

In civil construction engineering, the concrete and other materials are put into the mold to make a predetermined shape. When the concrete is poured, the free height of the concrete should not exceed 2m. When it exceeds 3m, it should be Take corresponding measures.

Pouring of columns

1. Before pouring the column, the bottom of the column should be filled with 5-10cm thick halved gravel concrete with the same mix ratio as the concrete. The column concrete should be vibrated in layers. When using the plug-in vibrator, the thickness of each layer is not more than 50cm, vibrating rod Do not touch the steel bars and embedded parts. In addition to the vibrating on the top, someone below needs to beat the template at any time.

2. If the column height is within 3 meters, the ash can be poured directly from the top of the column. When the column height exceeds 3 meters, measures should be taken to use stringed cylinders to cast in sections. The height of each section shall not exceed 2 meters.

3. The column concrete should be poured at one time, if construction joints are needed, it should be left under the main beam.

Specification:

Company introduction:

Henan Coal Science Research Institute Keming Mechanical and Electrical Equipment Co. , Ltd.

Henan Coal Science Research Institute Keming Mechanical and Electrical Equipment Co. , Ltd. is a subsidiary of Henan Coal Scientific Research Institute Co., Ltd.It is the first company in China to develop and produce shotcrete machines. It is one of the national standards for the development of spraying industry.

Achievements: It has more than 20 national invention patents and utility model patents, and more than 10 identification of relevant departments. It has won 8 awards from coal associations and provincial departments, and won the Henan Provincial Science and Technology Progress Award.In 2014, “ Keming ” brand won the famous trademark of Henan Province. It has been awarded ISO9001 Quality Management System Certification, OHSAS 18001 Occupational Health and Safety Management System Certification, ISO14001 Environmental Management System Certification and CE Certification.

Service: mechanical and electrical products, chemical technology, the development and manufacture of mining products, technical research of energy conservation and environment protection technology, and relative consultation service.

Main Products:

wet/dry shotcrete machine, plastering machine, concrete/shotcrete pump, grouting pump, cement pump,mortar pump, slurry pump, hose pump, cement/concrete mixer, concrete foaming machine etc.

Web: www.kemingtech.com

ADD: No. 17, Fengyang Street, High-Tech Development Zone, Zhengzhou, Henan, China (Mainland)

Exhibition:

FAQ:

1. Q: Which pump model should we choose?

A: To recommend the most suitable model, please let us know your requirements and the details of your project, then will give you the professional suggestions soon.

2. Q: What is the vulnerable part? How many spares should we prepare?

A: After long-time running, the rubber piston and cylinder sleeve may get worn. We will offer some spares for free.

Referring to the service life of each part, we will put a rough estimate of requested spares according to your project scale.

3. Q: Can we have customized model?

A: Yes. Customized production and OEM production are available according to your actual requirements.

4. Q: Do i need technical skills to operate this machine?

A: Yes. Please read the Operation Instruction for some basic technical skills before operating this machine, and contact us if any operation procedure is unclear.

5. Q: What should we do if there are some problems with the machine?

A: The Operate Instruction will help with routine maintenance and common problems.

Also, you can contact us for technical instruction by email, instant messenger or live video etc.

6. Q: What is the lead time?

A: 1 week for sample model, 2~3 weeks for customized model. It depends for mass production.

7. Q: How about the package?

A: The machine will be wrapped by plastic film and packed by fumigation-free wooden case along with spare parts.

8. Q: How to place an order?

A: Both online order and offline order are acceptable.

It is suggested to place online order with a Trade Assurance to get full protection for first order.

9. Q :How to pay for this order?

A: Generally, TT, 30% deposit 70% before shipment;

L/C at sight (high bank charge, not suggest, but acceptable);

100% TT in advance (especially for small amount and spare parts etc.)