C Series -- Showtechled Outdoor Fixed High Brightness Energy Saving LED Display Advertising Media LED Screen
(1) Description of Ourdoor Fixed High Brightness Energy Saving LED Display:
1. High brightness : C1531 Mesh screen brightness is up to 12000 nits, Standard configuration is 8000nits and it can reach up to 12000nits with high brightness level LED lamp such DIP 349.
2. Energy saving and low power consumption, the maximum power consumption is 360W/sqm, and the average power consumption is 100W/sqm.
3. Front&rear installation and maintenance: C series mesh can be installed in a variety of outdoor environments because it can be either front or rear installed and maintained; Modules, receiving cards, power supply, cabinet, all the parts can be front maintained, not merely modules.
4. Lightweight : C series mesh cabinet frame materials is aluminum , only 15-20kg/㎡
5. High refresh rate: Refresh can reach 3840Hz.
(2) Quick Detail:
● Pixel Pitch: 15.625*31.25mm(H*V)
● High transparency: 50%
● Brightness: 12000cd/㎡
● Avg Power Consumption: 100W/㎡
● Refresh rate: 3840Hz
● Maintenance type: Front / Back Maintenance
(3) Specifications:
Module Parameter | ||
1 | Item | C1531 |
2 | Pixel Pitch | 15.6*31.25mm(H*V) |
3 | Pixel density | 2048dots/㎡ |
4 | LED configuration | DIP349 |
5 | Module size | 500(W)*250(H)*25(D)mm |
6 | Module resolution | 32(W)x8(H) |
7 | Scanning Mode | Static |
Cabinet Parameter | ||
1 | Cabinet resolution | 64(W)x32(H) |
2 | Cabinet size | 1000(W)*1000(H)*85(D)mm |
3 | Cabinet weight | 19.5kg |
4 | Cabinet marerial | Aluminum |
5 | Transparency Rate | 50% |
6 | Brightness | 12000cd/㎡ |
7 | Viewing angle | 120°(horz.), 60° (vert.) |
8 | Optimal View Distance | 15m |
9 | Gray scale | 14(bit) |
10 | Max Power Consumption | 360W/㎡ |
11 | Avg Power Consumption | 100W/㎡ |
12 | Work Voltage | AV190-260V |
13 | Frame Frequency | 60Hz |
14 | Refresh rate | 3840Hz |
15 | Operation System | Win7&XP |
16 | Control Mode | Synchronization with PC |
17 | Operating Temperature | ( -40℃~+50℃ ) |
18 | IP Rating(Front/Rear) | IP65/IP65 |
19 | Installation / maintenance type | Front / Back installation Front / Back maintenance |
20 | Life Span | 100,000Hours |
Notices:
1. The power supply must be supplied to the large screen step by step, because the maximum power state of the entire screen will have an impact on the entire power distribution system.
2. The LED display screen is not allowed to play the full white screen with the highest brightness for more than half an hour, so as to avoid excessive current, power cord heating, damage to the LED light, and affect the service life of the display screen, it is recommended to play dynamic video mainly;
3. During the use of LED display products, the power supply cannot be turned on and off continuously, and there should be at least 1 minute between the two operations;
4. Non-professionals are forbidden to touch the internal circuit of the large screen of the LED display to avoid electric shock or damage to the circuit; if there is a problem, please ask a professional to repair it.
Application:
Widely used for outdoor squares, stadiums, hotels, hospitals, schools, shopping malls, supermarkets, etc.
FAQ:
Q1: What's the highest brightness when I use in Middle Eats or Russia?
A: P15.625*31.25 highest brightness is 8500 to 12000 CD/㎡.
It is not only help with the clear performance even when there is strong sunshine at 12:00am to 14:00pm, the audiences still see clear in outdoor environment.
Q2: How do I adjust the brightness when there is day or night?
A: There can be supplied with the light sensor, it can be automatically adjust the brightness when there is day or night.
Q3: Is that complicate for installation?
A: The frame is simple and light structure frame. A Single person also can finish the installation easily.
Q4: What's the power consumption?
A: It is 100W/㎡ of the outdoor transparent led display. We don't need to spend high electricity cost. It is 336% power saving for whole big project such as 300 ㎡.
Q5: How is maintenance?
A: If there is 1 LED out, then we just take out of one single led bar and change with the new one. No need to return back the whole module. It is not only save the time but also save the freight.