Higher - Gloss Soft Petg Shrink Film For Beverage Bottle Lable Printing

Supply Ability

Supply Ability:1000 Metric Ton/Metric Tons per Month

Packaging & Delivery

Packaging Details: Suspended Pallet Packing
Lead Time : About 7 - 15 days after confirmed the order

Port: Shanghai

1. Product Details Of PETG Shrink Film

HYF produced PETG high shrink film.

The valid time is 6 months and the TD is ≥75%; MD is ≤3%.
The testing method is vertically putting into the hot water for 10 seconds. The temperature of water should be 90℃, or, depending on clients’ requirements.
Width can be 4200MM, and the annual capacity Is 12000 tons
High transparency, high gloss, low haze, excellent printing performance,
high tensile strength, high shrinkage rate and low natural shrinkage of storage.
Applied with environmental requirements of EU ROHS, Reach.
No plasticizer, No halogen and renewable utilization.

2. Product Specifications Of PETG Shrink Film

1) Thickness: 20mic - 80mic
2) Width: 450mm - 1200mm
3) Length: 2500m - 5000m
4) The shrinkage: 70% - 78%
5) Can provide free samples of 150m - 200m.

3. Product Parameter Of PETG Shrink Film

4. Application Of PETG Shrink Film

-Widely for all types of bottles, cups, trays printing

-Used for making full body sleeves and containers

5. Advantages Of PETG Shrink Film

"Slow shrink" behaviour
Very high shrinkage ratio (78%)
Excellent processing properties
Eco-compatible
Excellent transparency

6. Package Of PETG Shrink Film

7. Storage Of PETG Shrink Film

Store our PETG shrink films below 30℃ in its original packaging;

Avoid damages from direct sunlight, high moisture and falling down.

Shelf life: 6 months.

8. Production Lines Of PETG Shrink Film

9. FAQ Of PETG Shrink Film

1) Can I have a sample order?
Yes, we welcome sample order to test and check quality.
Mixed samples are acceptable.

2) What is the lead time?
Sample needs about 7 days prepared; mass production time needs 15-25 days normally.

3) Do you have any MOQ limit?
Our MOQ is 1 ton
SeaPort: FOB Shanghai

4) What information should I let you know if I want to get a quotation?
The external size of your products (Thick x Width x Length x Shrinkage) and the quantity.