Automatic Side Sealer Shrink Tunnel Heat Shrink Wrapping Machine

Product Feature

ZS-6030T adopts advance blowing from the bottom of the chamber, fully use of heat to arise energy efficiency. Frequency inverters control blowing and conveyor speed separately. The blowing direction is adjustable. Visible window has anti-fogging function and can show the shrinking process in the chamber. The speed of finger conveyor is adjustable which controls equal distance among products to make sure consistent sealing. It can be used for packing aluminum, flooring, fabric rolls, MDF etc. The machine is suitable for mass production of long materials.

When it packs different sizes, the adjustment is very simple by rotating the hand wheel to increase the reliability.

The machine adopts advanced Mitsubishi PLC programmable controller, with safety protection and alarm devices, while the sealing system can have a continuous sealing order without replacement; Maintenance is very simple. Feeding length controls through a combination of electric eye detection and time relay to control precise film length that makes it easier to control the contraction effect. Two groups of horizontal and vertical sensors are easy to switch for thin or small packages which can easily complete sealing packaging operations.

Automatic rolling waste material : Using a separate motor to control which is not too loose or too tight to crack and is easy to remove the waste.

Basic Information

Product Display





















Standard Safety Performance

1. The transverse sealing knife is equipped with automatic anti-wrong cutting product device.
2. There are protective devices or warning signs at unsafe locations of the machine.
3. The machine is equipped with emergency stop control device, it can stop working and restore all the organs to the initial state after pressing the emergency stop switch.


Packaging Details

1. Spray anti-rust oil
2. Fix the machine on the pallet
3. The machine is also wrapped with stretch film and sponge pads, prevent the machine from impact, moisture, dust
4. Covered with sea export plywood case.
5. Loading Port: Guangzhou or Shenzhen