Heat Shrink Wrap Sealing Machine Pof Pvc Pe Film Carton Box Cling Thermo Shrink Wrapping Package Machine

Product Feature

Servo-driven sealing offers precise electronic control for immediate and accurate sealing action, ensuring strong, consistent seals. The seal opening height is electronically programmed to vary with product height, maximizing output speeds for smaller products.

Servo drives enhance this industry standard's performance by eliminating pneumatic components. Equipped with self-adapt feeding system adjust feed speed automatically according to speed of host machine

Whole system be standby status when feed by manual or miss feeding, switch-on automatically fill to continued product feeds

HMI accomplish all working date easily, the panel with date memory for various products allows quick changeovers by simply calling up the needed date from the database. Error of shows on screen with automatic inspect function make easier for operator to do emendation.

Continuous cross seal without gap at sealing line, waste film can be saved 10%~20% compared with other traditional equipments which save customer cost a lot.

1. The longitudinal seal (side seal) can be continuously and uninterrupted cut by a thermostat knife.
2. The horizontal seal adopts the form of thermostat cutter and lifting seal.
3. When the product size varies within the allowable range of equipment, it may be adjusted by the equipment without the need to replace any mould or fixture.
4. In the horizontal or vertical direction, the length of the product can be automatically detected in the two groups of electric eyes. The length of the product is not limited to produce products of different lengths at the same time.
5. It is easy to operate and learn. Five sets of converters are used to control the transmission accurately.
6. The safety door of organic glass not only guarantees the safety, but also monitors the production situation.

Basic Information

Product Display





















Standard Safety Performance

1. The transverse sealing knife is equipped with automatic anti-wrong cutting product device.
2. There are protective devices or warning signs at unsafe locations of the machine.
3. The machine is equipped with emergency stop control device, it can stop working and restore all the organs to the initial state after pressing the emergency stop switch.


Packaging Details

1. Spray anti-rust oil
2. Fix the machine on the pallet
3. The machine is also wrapped with stretch film and sponge pads, prevent the machine from impact, moisture, dust
4. Covered with sea export plywood case.
5. Loading Port: Guangzhou or Shenzhen