SIBOASI BV CE Badminton Racquet Stringing Machine With Full Parts

Function

1. Intelligent computer automatic pound correction

2. Stable constant pull function.

3. Self-Checking

4. Store memory function, can set 4 groups of data

5. Pulse width modulate, variable speed can be available,protecting the string from hurting when the string is in tension.

6. 4 groups of pre-stretch,suitable for different string

7. Sensor automatic string control,improving stringing speed and avoid breakdown

8. Three gears for speed

9. Knot and pound increasing set,automatically reset after knot

10. Three gears of voice

11. The voltage is 100-240V,suitable for any countries.

12. LB and KG transfer function.

13. Pound adjust function,minitrim 0.1LB.

14. Stringing head has the string protection system,which can be adjusted according to the stringing route.

15. Full set of tools for free

How to make racket stringing?

The first step to get a racket is to check the racket, whether there is paint peeling, whether the racket frame is worn, and use your experience to make a proper judgment on the number of pounds that the racket can withstand, whether it can be high pounds, The paint peeling and wear on the frame should be pointed out in advance to avoid unnecessary trouble.
When the racket is on the stringing machine, the handle logo is upward, which many people tend to ignore. As a stringer, you should learn as much as you can about the performance of each racket. Whether it is offense, balance or defense. The characteristics of each string. Each person's style of play, ability, so that the racket and string can be combined through the most suitable pounds.

Threading, pulling

1. The vertical line starts from the top frame of the racket, and goes through the two sides in turn, and pulls the line evenly to both sides to ensure that the left and right sides of the racket are subjected to the same tension at the same time to achieve the same force. When threading to the bottom 9 holes, skip to the bottom 12 holes (two holes in the middle), go out from the top 11 holes, then go through the top 10 holes, and go out from the bottom 10 holes, and finish the vertical line.
2. The horizontal thread is passed through the lower 9 holes into the lower 5-6 (indefinite) holes and knotted, and the lower 10 holes start to pull the thread. When threading to the top 11 holes (indeterminate), please reduce the pounds by 2 pounds and restore the pounds of the vertical line), and finally jump to the upper 4-5-6 holes to tie a knot (indeterminate).

Tie

When you pull the last string to be knotted, add 10% to the vertical line pounds to prevent the knot from losing pounds.