4 Band RF Mobile Signal Repeater 15dBm LTE 700 AWS1700 GSM Repeater

High-end users occupy a big proportion of the high-rise building areas, with a large communicate traffic. They are very sensitive with the quality of the internet, require a stable signal quality and a fast data transfer speed rate. But the building has a strong shielding effect on the mobile terminal to receive the signal in high-rise buildings. In high-rise buildings, there are mobile signal blind spots in the basements, the lower floors and the elevators.

With Ping-Pong effect on the higher floors, causing frequently switching, pilot pollution and poor call quality of the mobile station. In addition, in some buildings, although the mobile phone can be used normally to call, the large density and the congestion of the base station channel, make the mobile phones difficult to get on line.

Indoor Quad Band Signal Repeater (Cell Phone Signal Booster) series is an ideal solution for three wireless systems in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.

The repeater improves mobile signals with no negative impact on human health.

Eliminate dropped calls and increase data speeds with a signal booster.

Mobile Signal Repeater Advantages:

Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LED Digital Panel.

Set the technical parameters simple and efficient, this is easier than DIP Switch.

Mobile Signal Repeater Support these systems:

Model:

GW-10LGDW, 10dBm

GW-15LGDW, 15dBm

GW-20LGDW, 20dBm

GW-23LGDW, 23dBm

GW-27LGDW, 27dBm

GW-30LGDW, 30dBm

Mobile Signal Repeater Features:

1. Cost effective solution for weak signal zones, reduce drop/off calls.

2. Compact size, low power consumption,

3. easy installation, great cover.

4. Expansion and extending of the signal of base station.

5. Optimization of the quality of the signal and source

6. Cover about 500~3000m² without block or obstruct.

7. High linear design, ALC function design, low interference to BTS.

8. Support any cellular devices (voice & data & video)

9. Wide band signal booster, or customize selective band booster.

10. Support three wireless systems

11. Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

Mobile Signal Repeater Standard Package:
1) AC90-264V, DC power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS

Mobile Signal Repeater Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)

Mobile Signal Repeater Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.

Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.

Mobile Signal Repeater Specification:

Mobile Signal Repeater Application Diagram: