High Power Desktop Signal Jammer Bluetooth LOJACK 868 433 315 Cell Phone Block 2G 3G 4G 5G

This Selectable Portable 3G Cell Phone WiFi Jammer & GPS Signal Jammer that you are viewing here is the new designed signal jammer that is designed with the ability to cut off the signals of GSM, DCS, PCS, 3G,4G, 4G LTE,4G WiMax and WiFi , i at the same time.

The powerful jammer has a wide affected frequency ranges to include CDMA/GSM, DCS/PCS, 3G, 4G LTE, 4G Wimax and WiFi . It also has a jamming range up to 20m, depending on the signal strength in the given area. Within the range, just turn on the jammer, all wireless connection to 2G, 3G, 4G or WiFi network will be disabled at the same time. Also, the jammer is a selectable unit. In other word, user can choose to allow operation of one or a few of frequency bands. Adjustment of ON or OFF any of the single bands will not cause any disruption to the operation of others..

More details and specifications of this selectable handheld 2G 3G 4G WiFi jammer are just as follows, if you want to know more just come and get the overall information.

Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.

Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.