cell phone signal booster for cell phone signal booster for 5g booster weboost home multiroom
|
Specificatio |
Model | JY814 | ||||||||||||||
Technique Data | GSM | CDMA | DCS | WCDMA | TDD-LTE | FDD N66 | TDD N77/N78 | ||||||||
Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | ||
Frequency Range(MHz) | 824-835 /890-915 | 869-880 /935-960 | 890-915 /1710-1785 | 935-960 /1805-1880 | 890-915 /1710-1785 | 935-960 /1805-1880 | 1710-1785 /1920-1980 | 1805-1880 /2110-2170 | 2515-2675 | 2515-2675 | 1710-1780 | 2110-2200 | 3300 | 4200 | |
Max. Gain(dB) | 65 | 75 | 65 | 75 | 65 | 75 | 65 | 75 | 65 | 70 | 65 | 70 | 65 | 70 | |
Max. Gain (dBm) | 20±2 | 20±2 | 20±2 | 20±2 | 20±2 | 20±2 | 20±2 | ||||||||
Max. Output Power(dB) | ≤6 | ||||||||||||||
intermodulation (dBc) | ≤36 | ||||||||||||||
VSWR | ≤1.5 | ||||||||||||||
RF Connector | N(F) | ||||||||||||||
power interface | DC5.5-2.1 | ||||||||||||||
operating voltage | DC5V | ||||||||||||||
operating current | <2A | ||||||||||||||
input voltage | AC100~240V,50-60Hz | ||||||||||||||
Product size | 210*55*160mm | ||||||||||||||
Package size | 315*215*80mm |
Installation |
Installation Instructions
Installation Method: 1. Find the strongest direction and position of the received signal for mobiles at the top or the periphery of the building, as the location for installing the outdoor antenna, pay attention that the location should be paid to lightning protection. The installation height should not be higher than the lightning protection network of the building. If it is higher than the lightning protection network. If it is necessary, install a lightning rod 1 meter above the outdoor antenna and ground it well. 2. After selecting the appropriate location, fix the outdoor antenna to the wall or bracket. 3. Select an appropriate location in the relevant indoor location (close to the power supply and the outdoor antenna end, rain-proof, sunshine-proof and ventilation is best location) install indoor straight machine, and fixed to the wall or bracket. 4. Lead the outdoor antenna to the 'BTS' (outdoor) interface, and the connection between the outdoor antenna and the amplifier is completed. 5. After defining the indoor antenna installation position, fix the antenna. 6. The indoor antenna connected to the amplifier, one port connecting to the indoor antenna interface, and the other port connecting to the repeater's 'MOBILE' (indoor) port.