Electric Flexible Heating Element 110v Silicone Rubber Heater Blanket For Machine
Our silicon rubber heaters are capable of operating with excellent performance under many adverse conditions, including: moisture, outdoor exposure or ambient temperatures, radiation, ozone, compression set, vacuum, fungus, oils, solvents, and many other chemicals.
Insulating resistance | ≥50MΩ | ||
Size Deviation | ±0.5% | ||
Output | Up to 5KW/M2 | ||
Wattage Tolerance | ±5% | ||
Compressive strength | 1500V/S | ||
Wattage | 1500w | ||
Temperature controller | Dial | ||
Power lead wire | Silicone rubber insulated stranded wire | ||
High voltage resistance | 1.5KV |
Silicone Heating Element Specifications:
Temperature range | -40.00~180.00°C |
Electric resistance precision | ±10%( bigger value selected) |
Power density | 0.10~1.50w/cm² |
Mechanical pressure | 100.00kg/cm² |
Minimum bending radius | 3.20mm |
External insulation material | Silicone glass fiber |
Internal heating element | Ni-Cr alloy |
Thickness | 1.5mm-3mm |
Voltage | 3.7-660V |
Specifications of Silicone Heating elements
The Silicone heater can be made with two heating elements: a winding wire heating element or etch foil heating element. The winding element is composed of resistance wires wound on glass fiber wires to provide support and stability. The etch foil heater is made of thin foil (. 001") as a resistance element. For small to medium quantity, medium to large size heaters, it is recommended to use wire winding type heating element, and because of the cost of the wire wound type is more competitive, it is better to produce wire winding type before using etched foil for mass production.