Condensation Cure Two-part Silicone Liquid Rubber for Making Manufactured Stone Molds

Product Description
Silicone liquid rubber is called Tin cure silicone rubber which is also called condensation-cure silicone mold rubber, these are high-tear silicone mold rubbers that are known as the “work horse” of the industry because of their performance and economy. Tin cured silicone molds are used for casting wax, cement, gypsum, polymer modified gypsum, resins, etc.

Product Datasheet

Application of RTV-2 silicone liquid rubber

A: Cultural relic duplication, architectural decoration, statues
B: Resin crafts
C: Lighting ornaments, candles
D: Plaster, Gypsum,Cement,Concrete decorations
F: Model design, product exploitation, etc.

Features of RTV-2 silicone liquid rubber

Outstanding release properties
Variable pot life and cure time
Rapid cure time
Flexible, elastic material with High tear resistance
High tensile strength
Good polyester resistance
No risk of the casting material gripping the mould surface
Shore A hardness 28-30
High Flowabilty

Instruction of RTV-2 silicone liquid rubber:

How to make the silicone mold?

The surface of the original should be clean and free of loose material. If your productswith thin flower patterns, and especially with porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

1.Mixing

Please weight 100 Part A base and 2 parts of Curing Agent in a clean container.Thoroughly stir Part A base silicone before use, as filler separation may occur upon prolonged storage. Mixing Part A and Part B evenly until the CA30 completely dispersed in the base. Hand or mechanical mixing can be used, but do not for an extended period of time or allow the temperature to exceed 35C (95F). Mix suitably small quantities to ensure thorough mixing of base and curing agent.

It is strongly recommended that entrapped air be removed in a vacuum chamber, allowingthe mix to completely expand and then collapse. After a further 1-2 mins under vacuum,the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosenPouring the

2.mixture and curing

Pour the mixed Part A base silicone and part B the curing agent as soon as possible onto the original, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.

Storage and Precautions of silicone liquid rubber:

RTV-2 silicone rubber for making art crafts, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.

Package of RTV-2 Silicone Rubber

Part A base silicone: 20kg,25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 800g/bottle, 1kg/bottle