Easy to Use 1: 1 Mix Ratio Skin Safe Non-Toxic Silicone Mold Putty for Making Earplugs

Product Introduction

Silicone Putty is ideal for a wide range of impression type mold applications, including Castin’Craft Clear Casting Resin, EasyCast Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals! It is a easy to use, Odor Free, Non-Toxic, , two component silicone putty.

Application

It is suitable for the production of casting molds for jewelry, precise dental crown, dental fixed bridge, hoof care, earplugs, etc.

Physical Properties:

Usage Instruction

1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).

2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.

3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.

4. Close the lid immediately

after usage, the cover can not be interchanged.

Main Feature

Easy to use, 3 Minute working time, 25 minute cure.
Ideal for small molds, excellent detail from original.
Strong, flexible, reuseable molds.
High Heat range, up to 400º F.

Package

500g, 1kg, 5kg, 10kg, 25kg

Precautions

1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves.

2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.

3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer.

4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.

5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.