Fast Set Two-Part Silicone Silicone Mold Putty For Making Pads For Horse Hoof Better Care

Product Description

Silicone putty is formulated specifically for industrial applications where shock absorption and support are necessary. Two formulations are available: Firm support and super-cushion. These two-component systems are activated by mixing equal parts together until a uniform color is achieved at which point the hoof is packed and a full pad is applied. The full weight of the horse is applied for a custom fit and excess material is trimmed away. Benefits include: orthopedic support for the coffin bone; increased blood circulation; conforms to hoof with the movement of the horse; does not shrink and remains resilient throughout the life of application.

Silicone putty is measured 1:1 by volume (no scale necessary) and mixed together fast by hand kneading. The mixed putty is then placed in the bottom of the horse hoof after it has been cleaned and prepared.

The material needs to be fast curing, safe for the horse, and reliably sturdy and strong.

Hoof putty, ideal for filling old nail holes. Easy to apply and shape for a clean result. Protects the old nail hole against penetration of moisture and debris.

Physical Properties:

Usage Instruction

1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).

2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.

3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.

4. Close the lid immediately

after usage, the cover can not be interchanged.

Package

500g, 1kg, 5kg, 10kg, 25kg

Why choose MC silicone putty?

Skin-safe
Non-toxic - contains no nasties
Fast Cure - sets within 30 minutes
Easy - you don't even need to weigh it... just take out two equal looking amounts of putty from the tubs
No mould box needed - this putty can be used on vertical surfaces, 3d items and even on your toes (if that's your kind of thing)
Vegan-friendly & cruelty-free

Precautions

1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves.

2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.

3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer.

4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.

5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.