Fast Cure Hardness Shore A 35 Platinum Catalyst Silicone Putty For Making Polyester Toys Molds

Introduction

MC- Silicone PUTTY are new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand to a variety of surfaces. Silicone Putty is mixed in equal amounts (1A:1B) by volume/weight.MC-P35 has a pot life of about 5-20minute with a cure time of about 30-60 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), durable and will resist high temperatures (for casting low-temperature melt metal alloys). They also resist cure inhibition.MC-P35 are also FOOD SAFE and can be used for culinary applications.

Physical Properties:

Application

It is suitable for the production of casting molds for accessories,jewelry,resin crafts, precise dental crown, dental fixed bridge, hoof care,etc.

Usage Instruction

1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).

2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.

3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.

4. Close the lid immediately after usage, the cover can not be interchanged.

Main Features

1. Good plasticity, small volume incorporation rate, it needs only 3-5min to vulcanize into elastomer at oral temperature, very easy to remove from the mouth after the stamp, and has good chemical stability.

2. High accuracy of mold impression, capability of reproducing the fine structure of the mouth, with good elastic recovery, and good tear strength and dimensional stability, it can provide accurate and reliable morphological basis for clinical dentistry.

3. It has compatibility with almost all model materials, reusable for a period of time and can be sterilized.

Package

500g, 1kg, 5kg, 10kg, 25kg

storage

Storage : it has a shelf life of 12 month in original package at a cool dry place.Storage : it has a shelf life of 12 month in original package at a cool dry place.Storage : it has a shelf life of 12 month in original package at a cool dry place.

Precautions

1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves.

2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.

3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer.

4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.

5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.

• MAKE YOUR OWN MOLDS THE EASY WAY – Simply knead equal parts of A and B together to form strong, flexible, reusable molds with excellent details. No liquids to mix together, no release agents required, no mold boxes or other equipment required.
• MAKE YOUR OWN REUSABLE MOLDS THE FAST WAY – You have up to 15 minutes working time and you can de-mold in only 1-2 hours. High heat range up to 450 F.
• TONS OF USES – Ideal for small molds for small impression molding, soap molds, candle molds, jewelry making and repair, antique furniture repair and other small object casting.
• CAST MANY TYPES OF MATERIALS – Moldable plastics, waxes, clays, urethane and epoxy resins, plaster and even some low melt metals.
• NON-TOXIC & ODOR FREE