Support Customization 6 10 20 ton Single girder Bridge Crane frequency inverter overhead crane
Introduction:
1. Rigid box-typed main girder;
2. Shot blasting for the whole body after welding and releasing internal stresses;
3. Painting epoxy zinc-rich primer, and the thickness of oil film is 140μm;
4. Main girder and end girders are connected by 10.9 degree high-strength bolts;
5. Driven by electric reducer or traditional LD drive system;
6. Running smoothly, brake efficiently, long service life.
Main Technical Parameter:
Lifting capacity(t) | 0.5~10t | |
Crane traveling mechanism | Traveling speed | 20 |
Rotational speed m/min | 1380 | |
Lifting mechanism& hoist traveling mechanism | Type | CD1, MD1 |
Lifting speed m/min | 8 0.8/8 | |
Lifting height m | 6 9 12 18 | |
Traveling speed m/min | 20 | |
Working system | A3 | |
Power supply | 380V, 50Hz, AC, 3-Phase | |
Applicable track steel I-beam | 120a~145c |
Safety Features:
Limit switch for lifting, cross traveling and long crane traveling .
Overload protect device: once overweight, stop working immediately.
Buffer: avoid collision.
Emergency stop switch: has the protection of any emergency.
Photos show: