35 mm Long Heat Shrinkable Splice Protector With Strength Member
Features:
1. Single holed(preshrunk)ends eliminates improper fiber threading
2. Smooth,deburred stainless steel reinforcing member ends decrease the risk of fiber damage during installation
3. Extended liner length prevents contact between the fiber and their backbone
4. Clear sleeve design permits easy centering of splice before heating
5. Sealing structure makes the splice free from effect of temperature and humidity from environment
Applicable to: optical fiber connection protection components, does not affect the optical fiber optical properties, fiber welding use.
Specification:
Item | Description | Sleeving | Outer tube (Heat-shrinkable) | Inner tube (Hot-melt glue) | Strenght Member | Unit | |||||||
Diameter (Before shrink) | Diameter (After shrink) | Length | Inner Diameter | Outside diameter | Length | Inner Diameter | Outside diameter | Length | Diameter | Length | |||
1 | Fiber Protection Sleeves _11mm_φ1.9_Without Strength Member | 1.9±0.1 | 1.25±0.1 | 11±0.1 | 1.4±0.1 | 1.9±0.1 | 11±0.1 | MM | |||||
2 | Fiber Protection Sleeves _15mm_φ1_with Strength Member | 1.8±0.1 | 1.4±0.1 | 15±0.1 | 1.5±0.1 | 1.8±0.1 | 15±0.1 | 0.5±0.1 | 0.9±0.1 | 15±0.1 | 0.5±0.1 | 14±0.1 | MM |
3 | Fiber Protection Sleeves _20mm_φ3_Without Strength Member | 3.9±0.1 | 2.5±0.1 | 20±0.1 | 3.4±0.1 | 3.9±0.1 | 20±0.1 | MM | |||||
4 | Fiber Protection Sleeves_20mm_φ4_Without Strength member | 4.4±0.1 | 3.0±0.1 | 20±0.1 | 4.0±0.1 | 4.4±0.1 | 20±0.1 | MM | |||||
5 | Fiber Protection Sleeves_25mm_φ1.8 | 1.8±0.1 | 1.4±0.1 | 25±0.1 | 1.5±0.1 | 1.8±0.1 | 25±0.1 | 0.5±0.1 | 0.9±0.1 | 25±0.1 | 0.5±0.1 | 24±0.1 | MM |
6 | Fiber Protection Sleeves_25mm_φ2.3 | 2.3±0.1 | 1.7±0.1 | 25±0.1 | 1.7±0.1 | 2.3±0.1 | 25±0.1 | 0.8±0.1 | 1.4±0.1 | 25±0.1 | 0.5±0.1 | 24±0.1 | MM |
7 | Fiber Protection Sleeves _24mm_ribbon _8F | 3.3±0.1 | 2.8±0.1 | 25±0.1 | 2.8±0.1 | 3.3±0.1 | 25±0.1 | 2.0±0.1 | 2.3±0.1 | 25±0.1 | 25x2x0.4 | 22±0.1 | MM |
8 | Fiber Protection Sleeves_34mm | 2.3±0.1 | 1.7±0.1 | 34±0.1 | 1.7±0.1 | 2.3±0.1 | 34±0.1 | 0.8±0.1 | 1.4±0.1 | 34±0.1 | 0.5±0.1 | 33±0.1 | MM |
9 | Fiber Protection Sleeves_35mm | 3.4±0.1 | 2.4±0.1 | 35±0.1 | 2.7±0.1 | 3.2±0.1 | 35±0.1 | 1.2±0.1 | 1.9±0.1 | 35±0.1 | 1.0±0.1 | 30±0.1 | MM |
10 | Fiber Protection Sleeves_40mm | 4.2±0.1 | 3.0±0.1 | 40±0.1 | 3.4±0.1 | 3.9±0.1 | 40±0.1 | 1.6±0.1 | 2.2±0.1 | 40±0.1 | 1.5±0.1 | 35±0.1 | MM |
11 | Fiber Protection Sleeves_40mm_Ribbon _12F | 5.5±0.1 | 4.4±0.1 | 40±0.1 | 3.9±0.1 | 4.4±0.1 | 40±0.1 | 3.6±0.1 | 5.0±0.1 | 40±0.1 | 25x3x0.4 | 39±0.1 | MM |
12 | Fiber Protection Sleeves_45mm | 4.2±0.1 | 3.0±0.1 | 45±0.1 | 3.4±0.1 | 3.9±0.1 | 45±0.1 | 1.6±0.1 | 2.2±0.1 | 45±0.1 | 1.5±0.1 | 40±0.1 | MM |
13 | Fiber Protection Sleeves_45mm_With magnetic | 3.4±0.1 | 2.4±0.1 | 45±0.1 | 2.7±0.1 | 3.2±0.1 | 45±0.1 | 1.2±0.1 | 1.9±0.1 | 45±0.1 | 1.0±0.1 | 40±0.1 | MM |
14 | Fiber Protection Sleeves_50mm | 4.2±0.1 | 3.0±0.1 | 50±0.1 | 3.4±0.1 | 3.9±0.1 | 50±0.1 | 1.6±0.1 | 2.2±0.1 | 50±0.1 | 1.5±0.1 | 45±0.1 | MM |
15 | Fiber Protection Sleeves_60mm | 4.2±0.1 | 3.0±0.1 | 60±0.1 | 3.4±0.1 | 3.9±0.1 | 60±0.1 | 1.6±0.1 | 2.2±0.1 | 60±0.1 | 1.5±0.1 | 55±0.1 | MM |
16 | Fiber Protection Sleeves_8mm_φ1.3_Without Strength Member | 1.6±0.1 | 1.1±0.1 | 8±0.1 | 1.3±0.1 | 1.6±0.1 | 8±0.1 | MM |
Continuous use temperature(℃) | -45 - 110 |
Radial shrinkage Rate (%) | ≥50 |
Axial Shrinking Rate (%) | ≤5 |
Low Temperature Property | No crackle at -55℃ lasting 4 hours |
Normal Operation Relative Humidity (%) | ≤95 |
Spark -over Strength (kV/mm) | ≥20 |
Tensile Strength (Mpa) | 14 |
Tensile strength after aging(Mpa) | 10 |
Elongation at break after aging (%) | 200 |
Dielectric strength (KV/mm) | ≥25 |
Pictrues: