Magnetic Monitor Encoder KA800 Magnetic Gate Measuring Linear Encoder

SINO KA800M Magnetic Monitor Encoder, Priority installation

(1)To install the magnetic scale, the scale shall be kept parallel with the lathe guide rail.
(2) The center of the measuring range of the magnetic scale shall be located at the center of the
lathe travel. In addition, ensure that the actual measuring range of the magnetic scale is
at least 50mm greater than the maximum travel of the lathe.
(3) The magnetic scale shall be located as near as possible to the transmission screw rod of
the lathe. Mostly, the magnetic scale will move together with the workbench after
installation, and the read head is fixed on the lathe, namely, it is better than the wire does
not move

Technical parameter

Encoder Magnetic Scale Application

Heavy lathes, Milling machine, Drilling, Grinder machine, EDM (electrical discharge machine)

Machining Centers, PVC Cutting Machine, Wood Cutting Machine, Glass-working machine, Material handling

Encoder Magnetic Mcale Application

Heavy lathes, Milling machine, Drilling, Grinder machine, EDM (electrical discharge machine)

Machining Centers, PVC Cutting Machine, Wood Cutting Machine, Glass-working machine, Material handling

Detail image:

Why choose us?

Magnetic scale can be cut as your requirement

Fully sealed read-head with the perfect structure of the profile makes it match IP67 protection class

Advanced technician and inner structure

Automatic gain control technician reduced the requirement for installation, The gap between the reader and tape can be 3mm (5 microns)

Questions & Answer :

1, What’s max measurement length?

Measurement length up to 100,000mm

2, What are the length 120mm~ 100000mm represent for ?

Answer : All these length mean table travel length ( table moving size , NOT table size ) of the machine x y z axis . You may need to add extra 5.5 inch for total length .

3, If i need full set of 2 Axis dro with scales for my lathe machine , how should i purchase them ?

Answer : You can select, they are " 1pc 2 Axis dro " " Travel length **mm of linear encoder or magnetic encoder" " Travel length ***mm" , then you will receive what you want .

4, My machine x axis moving length is 260mm , and y axis moving length is 530mm , can you offer this kind length that not listed in the options ?

Answer : Each scale measuring range has 20mm increment. That means the 250mm scale measuring range can reach up to 270mm . So you can select the 270mm scale and 570mm scale for your machine .

5, If i only buy 1 piece scale separately , can i get the user manual ?

Answer : The user manual comes with DRO , But you can contact the seller to get download .

6, What should I choose for my lathe or mill ?

Answer : The lathe usually is a 2 axis readout while the mill can be either 2 axis or 3 axis

7, Can I cut the scale if it's too long for my machine ?

Answer : Technicality NO. if you are novice , otherwise , the scale may probably be damaged and cannot be used

8, Are they all ship by Fed Ex, UPS, DHL ?

Answer : Yes. Standard FedEx support and others are available