SINO Economy 2 Axis LED Digital Readout System DRO SDS2MS
LED DRO SDS2MS is one of the SDS2 series digital readout.
That is an economy version of SDS6 series digital readout.
It also employs the newest 16 bits SCM technology and is allowed to input the high frequency of A/B signals up to 5MHz.
That's good enough for most of 2 axis display requirement, like the high precision coordinate boring machine, floor boring machine, grinding machine, lathe, milling machine and so on.
The plastic case is try to make the weight ligher to save more transportation cost.
Upgraded Functions:
SDS2 series can change the decimal digits to be three, four or five digits to improve the calculating precision.
The system has maximum 40 sections non-linear error compensation to improve the positioning precision.
4 / 5 decimal digits can be chosen in inch mode. 4 digits can satisfy long scale requirement, and 5 digits can satisfy high precisions display.
Specifications :
Supply Voltage range: AC 80V~260V; 50~60Hz, US Plug available
Power consumption: 15VA
Operating temperature: 0~45 degrees centigrade
Storage temperature: -30~70 degrees centigrade
Readout allowable input signal: TTL/RS422 square wave
Allowable input signal frequency: Less than 5MHz
Max resolution of digital display length: 0.5µm
Min resolution of digital display angle : 0.0001/pulse
1 PC | 2 Axis digital readout SDS2MS |
1 PC | Transparent cover |
1 PC | Instruction Manual (English) |
1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.