SINO 3 Axis DRO Digital Readout TTL Input Signal For Milling Machine Lathe

These features facilitate the use of the graphics function. It features one of the highest input frequencies in the world, up to 5 MHZ with A/B, and is the first facility in China to employ a DRO system with a 16- and 32-bit calculators.

Features:

Three Axis Capability: The SINO DRO can monitor and measure the position of several machine axes at once since it supports up to three axes.
Digital Readout Unit: The DRO unit provides real-time measurements by displaying accurate numerical readings of the machine axes.
Transistor-Transistor Logic (TTL) input signals, which are often employed in industrial applications and guarantee precise and dependable data transfer, are used by the DRO system.
Compatibility: The system is designed to work with milling machines and lathes, making it suitable for various machining applications.
User-Friendly Interface: The DRO unit features an intuitive interface that is easy to understand and operate.

Usage:

Installation: Install the DRO unit in a convenient location near your milling machine or lathe for easy reading and access.
Connection: Connect the DRO unit to the TTL input signals of your machine axes using the provided cables and connectors.
Calibration: Perform the necessary calibration procedures to ensure accurate measurements. This may involve zeroing the scales and setting reference points.
Configuration: Set up the DRO unit according to your specific machine and application requirements. This may include selecting the appropriate measurement units (metric or imperial) and configuring other parameters.
Operation: Start the machine and monitor the position readings displayed on the DRO unit as you move the axes. The DRO unit will provide real-time measurements, allowing you to precisely position your workpiece or perform accurate machining operations

The DRO unit will provide real-time measurements, allowing you to precisely position your workpiece or perform accurate machining operations

SDS2-3VA DRO System Features:

The LCD display works with all Chinese optical linear glass scales and is widely used in lathe, drilling, boring, and milling equipment.

Because it can switch between Chinese and English on a single display, consumers from a variety of countries will find lathes and milling machines to be more useful.

Restitution for Linear Inaccuracies

Keep in Mind for Power Outages

Change of bedtime

Mathematical calculations

RS-232-C interface option

Specifications of SINO SDS2-3VA digital readout system + linear scale encoder

The SDS2-3VA is a high-performance universal display console that has the ability to mill, lathe, and grind.
Up to three linear encoders can be connected to this three-axis kind. Additional connectors are available to combine axes or change the input to suit equipment manufactured by other manufacturers. Please see the encoder compatibility guide below.

robust die-cast housing with a long-lasting and haptic front panel membrane.

big LCD screen that is easy to read.

Features include radius/diameter display, PCD, line of holes, 200 zero memory, and tool offsets.

Product image /photos:

The rack in the picture is optioned, not standard product.