For Aircraft, Tank And Navy Electrolytic Nickel Sintered Felt

Nickel sintered filter element, filter element, filter equipment, filter, filter equipment, powder sintered filter element, copper powder sintered filter element, stainless steel powder sintered filter element, titanium sintered filter element, PE sintered filter element, filter element manufacturer

Nickel filter element (including tube type and plate type) is made of industrial high-purity nickel powder as raw material, after sieving, cold isostatic pressing, high temperature and high vacuum sintering. Therefore, the nickel filter element has unique excellent performance with its high-tech material composition and special molding process:

1. Uniform structure, narrow pore size distribution, high separation efficiency
2. High porosity, low filtration resistance, high penetration efficiency
3. High temperature resistance, generally can be used normally below 280 degrees
4. Good chemical stability, acid and alkali corrosion resistance, and oxidation resistance
5. No particles fall off, no secondary pollution of the original liquid, in line with food hygiene and pharmaceutical GMP requirements
6. Good mechanical properties, press filter and suction filter, simple operation
7. Low pressure difference, small footprint, large flow
8. Strong anti-microbial ability, does not interact with microorganisms
9. The molding process is good, and the overall length without welding can reach 1000 mm
10. It can be regenerated online, is easy to clean, and has a long service life

Nickel sintered filter element, filter element, filter equipment, filter, filter equipment, powder sintered filter element, copper powder sintered filter element, stainless steel powder sintered filter element, titanium sintered filter element, PE sintered filter element, filter element manufacturer

Filter element parameters Filtration accuracy: 0.2um-100um Porosity: 28-50% Air permeability: 0.02-20M3cm/m2h.mmH2O Compressive strength: 0.5-1.5Mpa Temperature resistance: 280℃ (wet) Maximum working pressure difference: 0.6 Mpa Specification Model Diameter: Φ22mm Φ30mm Φ50mm Φ60mmΦ80mm Φ100mm Φ120mm Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface form: M20 interface M30 interface 222 interface 226 interface filtration accuracy: 0.22 micron 0.45 micron 1 micron 3 micron 5 micron 10 micron 20 micron 30 micron 50 micron 80 micron 100 micron

The metal fiber sintered felt is made of metal fibers with a diameter of micrometers through non-woven laying, stacking and high-temperature sintering. Multi-layer metal fiber felt is formed with different pore diameter layers to form a pore gradient, which can be controlled to obtain extremely high filtration accuracy and larger dirt holding capacity than single-layer felt.

Nickel sintered filter element, filter element, filter equipment, filter, filter equipment, powder sintered filter element, copper powder sintered filter element, stainless steel powder sintered filter element, titanium sintered filter element, PE sintered filter element, filter element manufacturer