Industrial Pleated Ss Sintered Filter Cartridge With 2-1000 Um Filter Rating
Stainless steel pleated filter elements/cartridges enjoy high strength, high flow rates and accurate micron filtration. Easily washable and re-used with changing of wire mesh layers.The high-pressure conditions in the nuclear industry, for instance, require filters made of super alloys - while the water treatment sector generally deals with much lower pressures and often utilises unsupported mesh filters.
Description of Stainless steel pleated filter elements
1.Material: SUS 304, 304L, 316, 316L Stainless Steel Wire mesh and sintered fiber
2.Advantages: Good permeability, Easy to be cleaned, High strength, Corrosion resistance, Low cost
3.Application: the filtration of high molecular polymer, drug, hysraulic oil, water treatment, hot gas and so on.
4.Features of Stainless steel pleated filter elements:
Specification of Woven Wire Mesh Pleated Filter elements/Cartridges with Layers Introduction:
Designed Filter Fineness (um) | Wire Mesh Protection Layer(mesh) | Fine Wire Cloth Control Layer(mesh) | Neutral Laye(mesh) | Strengthening Layer( coarse mesh) | Strengthening Layer( coarse mesh) | Layer Thickness(mm) | Air Permeability (L/Min/cm2) | Bubbling Pressure |
1 | 200 | 400*3000 | 200 | 12*64 | 64*12 | 1.7mm | 1.81 | 360-600 |
2 | 100 | 325*2500 | 100 | 12*65 | 64*13 | 1.7mm | 2.35 | 300-590 |
5 | 100 | 200*1400 | 100 | 12*66 | 64*14 | 1.7mm | 2.42 | 260-550 |
10 | 100 | 165*1400 | 100 | 12*67 | 64*15 | 1.7mm | 3 | 220-500 |
15 | 100 | 165*1200 | 100 | 12*68 | 64*16 | 1.7mm | 3.41 | 200-480 |
20 | 100 | 165*800 | 100 | 12*69 | 64*17 | 1.7mm | 4.5 | 170-450 |
25 | 100 | 165*600 | 100 | 12*70 | 64*18 | 1.7mm | 6.12 | 150-410 |
30 | 100 | 400 | 100 | 12*71 | 64*19 | 1.7mm | 6.86 | 120-390 |
40 | 100 | 325 | 100 | 12*72 | 64*20 | 1.7mm | 7.1 | 100-350 |
50 | 100 | 250 | 100 | 12*73 | 64*21 | 1.7mm | 8.41 | |
75 | 100 | 200 | 100 | 12*74 | 64*22 | 1.7mm | 8.7 | |
100 | 100 | 150 | 100 | 12*75 | 64*23 | 1.7mm | 9.1 | |
150 | 50+100+50+30+30+100+50 | 2.0mm | 25 | |||||
200 | 40+80+40+20+40+80+40 | 2.0mm | 26 |