Duplex Steel 2205 Sintered Wire Mesh Media Used In Laboratory Fluid Bed

Sintered wire mesh metal filter cloth is a porous metal plate made from multi layer stainless steel wire mesh, and sintered into one metal panel. It is usually consists of 5 layer (or 6-8 layer) mesh: protect mesh layer, filter mesh layer, protection mesh layer, reinforcement mesh layer, and reinforcement mesh layer. With high mechanical strength and wide filter rating ranges, sintered wire mesh filters are a new fine materials for filtration used in food, beverage, water treatment, dust removing, pharmaceutical, and polymer industry.

Plain weave sintered square woven wire mesh has good permeability characteristics and low resistance to flow. It can be designed with any number and combination of square plain weave wire mesh layers to achieve particular flow and filtration characteristics. Its filter rating range is from 1 um to 200 um, and max plate sizes up to 1200 × 1500 mm.

Dutch woven sinter wire mesh plate has evenly spaced openings and steady air permeability to flow, and has very great mechanical strength, commonly used in powder transport, laboratory fluid bed, driers, coolers and other dry solid materials.

Perforated sintered mesh has perforated metal as reinforcement layer support the sintered filter structure. So, it has very high compressive and mechanical strength. Perforated metal sintered filters are well used in oil wells, where fine particles need to be filtered under extremely high pressure conditions.

Sintered square woven wire mesh characteristics

• Good mechanical strength, potential to sustain constant filter rating under large pressure applied

• Easily cleanable with different filter cleaning procedures

• Reusable

• Corrosion and heat resistant construction materials are used

• Diverse filter ratings

Sintered Square Woven Wire Mesh Applications

1.Polymer production

2. Air and fluid filtration

3. Hydraulic Filters

4. Chromatography frits

5. Centrifuges