Punching Plate And Multi-Layer Sintered Filter Disc - Material Stainless Steel

A more common application of the sintering process involves laminating multiple layers of woven wire mesh together to form a sintered mesh part that compared to a single layer of wire mesh has increased mechanical strength, greater preservation of filter rating under pressure, is easier to clean, and has better structural integrity. A multiple layer sintered wire mesh part can maintain the filtration rating of its finest mesh layer, while also maintaining the mechanical strength of its coarser support layers.

Sintered Filter Disc specification

Sintered filter disc is composed of sintered wire mesh, which produced by spread and sintered in high temperature. the sintered filter disc will get the supreme filter efficiency and high dirt holding capacity depending on the different aperture. the stainless steel fiber felt overcomes the disadvantages, such as easy blockage, low capacity etc.

Features of sintered filter disc

1. Cleanable, can be for used many times.

2. High dirt holding capacity, high filtering accuracy, longer on stream life.

3. Pleatable,provide a large filter area, and can be welded and machined.

4. High porosity and excellent permeability which results in low pressure drop and large flow.

5. Corrosion resistance of acid, alkali, and organic solvent proof.

6. It can be used for a long period of service in the temperature of 600°c.

Description About Sintered Filter Discs

Material of sintered filter discs: MONEL wire mesh, INCONEL wire mesh , STAINLESS STEEL wire mesh, FeCrAl wire mesh,Hastelloy wire mesh etc.

Thickness of the sintered filter discs:1.5-10mm, as per your requirements.

Layers: 5-10layers, also depend on the usage.

Filtration:can reach 0.5micron.